You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just did mine and it works like a champ now. i hope it lasts longer than 2-3 months which is what is usually lasts.. It was easy too.. screw stealership prices..
My window was down last night when the skies opened up and I couldn't roll the passenger side window up. The inside of my car is soaked.
I followed your instructions here, except obviously my window was in the down position. It was easy getting it apart, but I had to roll the window up a little bit in order to lift up on it to get the track to line up with the panel when reassembling.
So I did this to my window motor and one of the brushes is not making contact with the internal spinning part. So I put it all together and it dosnt work at all now I tried punching the door pannel but I got nothing could the brush be the reAson why?
Great job, vo7848. this DIY save many Z members so much money, I am one of them, just did that today. $200 for part, and 1 to 2 hours worth of labor, freak that, by following this DIY and clear the dirt off the motor, then save me around $300, this is the $#!+.
im one of the few whose problem wasn't fixed by doing this. when i push up or down on the window button, nothing happens, and when i let go i hear a "click" coming from the passenger's side window control in the armrest. has anyone else had this problem? is my motor shot?
__________________
JWT Pop-charger, 5/16" MD Spacer, DC SS Headers, Kinetix High-Flow Cats, Borla TD, 3.5 Rear End
im one of the few whose problem wasn't fixed by doing this. when i push up or down on the window button, nothing happens, and when i let go i hear a "click" coming from the passenger's side window control in the armrest. has anyone else had this problem? is my motor shot?
I had the same clicking sound and the DIY fixed it
Will brake cleaner work instead of that electronics cleaner? I'm thinking it will, and that will save me a trip to the store... Anyone experienced with this?
after having this not work i thought it might have been due to the fact that i did not clean the part thorough enough. so today i sanded it and cleaned it with a needle. it looked much different than the first time i cleaned it. but i ended up with the same results. so its time to get a new one i guess. is autozone the best place to pick one up, or does anyone have anywhere better?
__________________
JWT Pop-charger, 5/16" MD Spacer, DC SS Headers, Kinetix High-Flow Cats, Borla TD, 3.5 Rear End
^ advance auto cost $10 less and in my area they could get them in 3-days.
THANKS OP, this "fix" worked out great!!
And to Izzeing... Your suggestion were spot on, except for the jewelers screw driver on the back of the carbon contact. I popped one of the contacts out and it was insane trying to put it back in... those contacts will crumble under any type of pressure, just a warning to others. I suggest the steps you mentioned, but pushing on the back of the actual spring is better. It will also prevent you from pushing the contact out of the motor casing.
I'll post pics soon... I just set the inner metal panel on my rocker and against my seat while I worked on things. I also removed the motor completly from the door, its easy to do.
My passenger motor went out again. I ordered a refurbished one from Autozone and got cracking on it today. Installed everything and went for the test. The window rolled down then died. It sounded like crap. I banged it a few times and it unrelentesly moved a few inches before totally stopping. Dammit.
I opened up the refurb motor and one of the brushes is completely stuck inside. While I was at it I went ahead and opened up my old motor again. Have it some more cleaning and then attached it to the power. Viola. The old one sounded new again. I didn't install it back yet as I want to see if I can get a new one from Autozone for my troubles.
Wow, haven't check this thread in a couple months. Glad I could help all you guys out!
__________________ Team Nextstage
Sponsored by Meguiar's, Imported Performance www.teamnextstage.com Team DNF n00bslayer & eater of children............................................................ ...............
thank you soooo much for writing this thread up.. the pics helped a bunch, my motor had been crapping out on me on and off for about 2 months, and it finally got stuck DOWN so i went ahead and cleaned the motor.. now it works great!! thanks you saved me like 300 bucks!! since it was stuck down, i couldnt use duct tape, but some how everything worked out
It sounds like no matter what, this is only a temporary fix. Replace OR clean.....its gonna fail again . Does anyone know if a window motor from another Nissan product would work (and not just for a short time) ???
It sounds like no matter what, this is only a temporary fix. Replace OR clean.....its gonna fail again . Does anyone know if a window motor from another Nissan product would work (and not just for a short time) ???
Yes, the cleaning was a temp fix. I ended up replacing it with a refurbished one from Advanced Auto Parts. It's been awhile now. It still works great...
__________________ Team Nextstage
Sponsored by Meguiar's, Imported Performance www.teamnextstage.com Team DNF n00bslayer & eater of children............................................................ ...............
. Does anyone know if a window motor from another Nissan product would work (and not just for a short time) ???
