heeeeeeelp
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Puerto Rico
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
heeeeeeelp
this is the situation, i had a p0011 code, i changed the camshaft position sensor bank1, and sitll receiving the p0011 code...
the car is smooth as a kitten..
still don't know what the problem is....
the car is smooth as a kitten..
still don't know what the problem is....
#2
Registered User
iTrader: (2)
Join Date: Aug 2008
Location: Raleigh, NC
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
pull the spark plugs, check if there is oil on them.
Also check the camshaft connector, and follow the wiring to the harness. if all else fails .. worst case it could be a loose timing chain.. how many miles do you have?
Also check the camshaft connector, and follow the wiring to the harness. if all else fails .. worst case it could be a loose timing chain.. how many miles do you have?
#5
Registered User
Thread Starter
Join Date: Jan 2008
Location: Puerto Rico
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post