Driver side window problem
#1
Registered User
Thread Starter
Join Date: Aug 2011
Location: Claremont NH
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Driver side window problem
i have a 2003 nissan 350Z and my driver side window does not work... i replaced the window motor/window switch... when i try and roll the driver side window down the switch it self makes a buzzing noise and does not stop untill i unplug the window motor please help i have spent $300 and i and getting really sick of this
#4
Registered User
Join Date: Jul 2010
Location: Toronto, ON
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
it's probably the window regulator that needs replacing. i would recommend not trying to use the motor till u get it checked out otherwise you could blow the new one. if you hear the buzzing.. it's probably the motor trying to get the window down but the regulator is preventing it from doing so.
also, regardless of whether u did the reset or not, it should still roll up or down. the reset is just for making sure it does the little drop when opening/closing the door...and so it doesn't open half way down when you do the automatic close.
incase you're not sure what the regulator looks like, it's this piece:
if you wana test it yourself, disconnect the motor from everything except for the power source and use the switch to see if the bolt spins clockwise/counterclockwise. if it does, you need a new regulator!
good luck
also, regardless of whether u did the reset or not, it should still roll up or down. the reset is just for making sure it does the little drop when opening/closing the door...and so it doesn't open half way down when you do the automatic close.
incase you're not sure what the regulator looks like, it's this piece:
if you wana test it yourself, disconnect the motor from everything except for the power source and use the switch to see if the bolt spins clockwise/counterclockwise. if it does, you need a new regulator!
good luck
#5
Registered User
Thread Starter
Join Date: Aug 2011
Location: Claremont NH
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
well before putting the new motor in i plugged it in just to see if the motor would work and nothing happend... the switch would buzz not the motor.... can someone send me a pic of the harness going into switch then the motor harness then the BCM harness.. i want to match all my wires up to make sure none of them have come out and the previous owner didnt just stuff them back in?
#7
Registered User
Join Date: Aug 2011
Location: United States
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
When ever i pull up the automatic window switch for the passenger window it will go up all of the then go down by its self, then i have to bring up the window by pulling up the switch half way, and when i open the door the window wont drop so it hits the paint HELP ME!!!
Trending Topics
#8
Registered User
Join Date: Aug 2014
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
i have a 2003 nissan 350Z and my driver side window does not work... i replaced the window motor/window switch... when i try and roll the driver side window down the switch it self makes a buzzing noise and does not stop untill i unplug the window motor please help i have spent $300 and i and getting really sick of this
I know this is an old message I'm looking at, but I have the same exact problem, and have done the same things you did. I was wondering what you finally did to fix the problem.
Thanks,
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM