Can't fill up gas tank
#1
New Member
Thread Starter
Can't fill up gas tank
I Just got some work done on my car and now I can't fill my up my gas tank. I Can only fill 5 gallons when I'm on empty. What happened to my car. This would happen to me at certain gas pumps, I only use shell but not at every shell.
#4
New Member
Thread Starter
#5
New Member
iTrader: (7)
Hopefully you dont have the same problem I had, I had to have my entire system replaced. I could never get full tank never fill up. Brought car to dealer they replaced a valve that goes from 1 tank to the other, after doing so they broke my fuel gauge. I ran out of fuel a few times because it would say half full but ended up being empty. Anyway good luck you may want to look into that valve.
#6
New Member
Trending Topics
#9
New Member
Thread Starter
Sorry about that. I got my art test pipes removed and put back on. Also had the rubber components of the front lower chamber arms replaced along with some other part related to the rubber that usually get replaced at the same time.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
Last edited by codek; 11-27-2013 at 12:16 PM.
#10
Registered User
Join Date: Apr 2012
Location: Gardner, KS
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about that. I got my art test pipes removed and put back on. Also had the rubber components of the front lower chamber arms replaced along with some other part related to the rubber that usually get replaced at the same time.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
#11
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Sorry about that. I got my art test pipes removed and put back on. Also had the rubber components of the front lower chamber arms replaced along with some other part related to the rubber that usually get replaced at the same time.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
I Just went to another shell and was able to put 10 more gallons in, so 5 +10 on empty = 20gallons? My gauge also says I have 253dte. That is really low.
The following users liked this post:
codek (10-07-2015)
#14
Registered User
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
lol
I thought I had a problem with my gas tank, but this happens occasionally. Like they said, you just need to hold the nozzle upside down and that usually does the trick. I have to push the nozzle up and hold onto it myself, I can't just put it on the clip to have it pumped automatically because it won't stay for some reason. So yeah, just push the nozzle up and pump it yourself and you should be fine.
I thought I had a problem with my gas tank, but this happens occasionally. Like they said, you just need to hold the nozzle upside down and that usually does the trick. I have to push the nozzle up and hold onto it myself, I can't just put it on the clip to have it pumped automatically because it won't stay for some reason. So yeah, just push the nozzle up and pump it yourself and you should be fine.
#16
New Member
Here is a thread that will help you understand the problem you describe:
https://my350z.com/forum/maintenance...g-the-gas.html
My 2003 Performance model was part of a voluntary recall by Nissan to repair the problem.
--Spike
https://my350z.com/forum/maintenance...g-the-gas.html
My 2003 Performance model was part of a voluntary recall by Nissan to repair the problem.
--Spike
#17
New Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
Tonyz_2004_350z
South East Marketplace
1
10-04-2015 12:53 PM