scotty68

My car been sitting for awhile now and since it stopped raining i need help getting this done. I bought these socket to redo the wiring cause it came with micky mouse wiring and the light was very dull (knew it when bought it) it's harder than i thought cause the wiring colors don't match at all. how would i go about this?

this is for the headlights for a 03 track model.

I've bought these

https://conceptzperformance.com/Cart...on.php?II=7259

KornerCarver

iTrader: (2)

What is it that you are trying to do?

Syner

RUNWDVL

iTrader: (10)

Holy sheet...

scotty68

bump!

scotty68

connect the harness wire to the headlight wires...but the wires don't match. tried finding diagrams but the colors are not the same. wiring is prob my weakness

AdvanZ33

iTrader: (105)

Track models came with HID headlights. Are you sure bought the correct part?

iideadeyeii

iTrader: (6)

Just use a basic 12v wire tester and wire up how you need to. That's literally all this forum can tell you. If you don't know how to use a wire tester then SOL

scotty68

well i bought mines used and didn't come with hid. that's prob why the wires color don't match... but from what i read the harness is the same. so if someone have their headlights off, it would be nice if I can get a picture of the socket. then i can see where the wires go. that would help at least 90% anyone?

scotty68

well there's at least 8 wires ...I'd be lost. I also tried some already and the blinkers was blinking 2x then it should be. so yah, pictures would help and can eliminate getting a 12v tester and still be lost.