Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

P0139, P0137 and P2A03 codes

Thread Tools
 
Search this Thread
 
Old 05-20-2015, 08:40 AM
  #1  
Taereek43
Registered User
Thread Starter
iTrader: (2)
 
Taereek43's Avatar
 
Join Date: Aug 2012
Location: Rincon, Georgia
Posts: 120
Received 0 Likes on 0 Posts
Default P0139, P0137 and P2A03 codes

OK, so I've installed HFC's a few months back and have gotten a CEL for Bank 1 Sensor 2, I replaced it and it was fine, for a bit, but then kept going on and off every couple of days. I replaced that sensor and noticed the splice wasn't good on it. Everything is fine for a few days and then the CEL comes on again. I get the car scanned and it's reading codes P0139, P0137 and P2A03.

The car is very hesitant taking from a stop and when I punch it in higher gears, like it stutters and then catches up. Every couple of days it reeks of fuel in the cabin. It's like the car is running rich, but have no issues with idle besides slight spudders every once in a while. I've look around the bay and see no fluids. I've sprayed around with carb cleaner looking for any vacuum leaks and looked for exhaust leaks around the cats.

I'm stumped with this one. Any else I could be missing. I was thinking of replacing the fuel damper and pcv valve, but I don't see them throwing those codes.

Note: When I rev in idle, I can hear a consistent hissing around 2000-2300 rpms, that's also the same rpms when decelerating that is pauses and then continues to drop.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
06-19-2022 06:30 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z Project X
Maintenance & Repair
11
10-17-2015 05:16 PM
Detailed Image
Cleaning & Detailing
0
09-28-2015 03:03 AM
Detailed Image
Cleaning & Detailing
0
09-11-2015 04:35 AM



Quick Reply: P0139, P0137 and P2A03 codes



All times are GMT -8. The time now is 02:42 AM.