I seem to be stuck, need help.
#1
Registered User
Thread Starter
I seem to be stuck, need help.
So i recently purchased my 350z track package and it had its issues which i didn't mind since i turn my own wrench but this thing has me stumped.
I had a few CEL's but i have solved all of them but 1 is lingering around and giving me a headache.
This is my exact message from my scan tool.
P0021
Ensure the open and close of throttle at the best moment.
Cause of P0021 includes a intake/left/front camshaft timing is not well set, camshaft over advance mechanical stuck, or actuator stuck at open position.
I have changed both cam position sensors, crank position sensor and cleaned vtc(new gasket), before I changed these sensors I would turn it over and it would need a few times before she turned on, now it fires up way better but idles like crap and exhaust smells rich.
This is the final issue I have to deal with, I would appreciate the help.
Not able to pass stupid E-test until this is solved, so its safe to say she is at a stand still until I get this solved.
Picture of my baby.
I had a few CEL's but i have solved all of them but 1 is lingering around and giving me a headache.
This is my exact message from my scan tool.
P0021
Ensure the open and close of throttle at the best moment.
Cause of P0021 includes a intake/left/front camshaft timing is not well set, camshaft over advance mechanical stuck, or actuator stuck at open position.
I have changed both cam position sensors, crank position sensor and cleaned vtc(new gasket), before I changed these sensors I would turn it over and it would need a few times before she turned on, now it fires up way better but idles like crap and exhaust smells rich.
This is the final issue I have to deal with, I would appreciate the help.
Not able to pass stupid E-test until this is solved, so its safe to say she is at a stand still until I get this solved.
Picture of my baby.
Thread
Thread Starter
Forum
Replies
Last Post
ThomBoh
Southern California
3
06-01-2016 03:23 AM