VisualSeven's 2005 Ultra Yellow 350z
#1
VisualSeven's 2005 Ultra Yellow 350z Progress Thread
Well im back i had a black 350z before but sold it, i went out to Europe for a while and the car would be just sitting so i decided to let it go and when i got back i needed to buy another car and well ended up with a Z again.
My previous 350z: https://my350z.com/forum/media-share...50z-black.html
Exterior:
- S2K Shorty Antenna
- JDM Clear Reflectors
- Cool white LED License plate lights
- 06+ headlights modded w/ ironman mod, STI-R projector lens, D2S MORIMOTO 3FIVE 5000k, and white corner led bulbs
- Stillen front splitter
- Nismo rear add ons
Interior:
- Blox 142 Spherical Polished Shift ****
Performance:
- Injen Intake
- Motordyne 5/16th plenum spacer
- Headers
- TiTek Test Pipes w/ TiTek defoulers
- M2 Performance Y-Pipe
- Agency Power Single Exit Exhaust
- Nismo clutch
- Uprev Tuned
Suspension/Brakes:
- Tein Basic Coilovers
- Hotchkis Front+Rear swaybars
- SPC rear camber kit + toe bolts
- SPL differential solid bushings
- Slotted front rotors
- Centric Premium E Coated Rear Rotors
- Hawk HPS Front + Rear Pads
Wheels/Tires:
- Front Rota P45r 18x9.5 +20
- Rear Rota P45r 18x9.5 +0
- Front tires Sumitomo HTR Z III - 255/40/18
- Rear tires Sumitomo HTR Z III - 265/40/18
[/CENTER]
My previous 350z: https://my350z.com/forum/media-share...50z-black.html
Exterior:
- S2K Shorty Antenna
- JDM Clear Reflectors
- Cool white LED License plate lights
- 06+ headlights modded w/ ironman mod, STI-R projector lens, D2S MORIMOTO 3FIVE 5000k, and white corner led bulbs
- Stillen front splitter
- Nismo rear add ons
Interior:
- Blox 142 Spherical Polished Shift ****
Performance:
- Injen Intake
- Motordyne 5/16th plenum spacer
- Headers
- TiTek Test Pipes w/ TiTek defoulers
- M2 Performance Y-Pipe
- Agency Power Single Exit Exhaust
- Nismo clutch
- Uprev Tuned
Suspension/Brakes:
- Tein Basic Coilovers
- Hotchkis Front+Rear swaybars
- SPC rear camber kit + toe bolts
- SPL differential solid bushings
- Slotted front rotors
- Centric Premium E Coated Rear Rotors
- Hawk HPS Front + Rear Pads
Wheels/Tires:
- Front Rota P45r 18x9.5 +20
- Rear Rota P45r 18x9.5 +0
- Front tires Sumitomo HTR Z III - 255/40/18
- Rear tires Sumitomo HTR Z III - 265/40/18
[/CENTER]
Last edited by SR71; 08-14-2014 at 08:06 PM. Reason: Link removed
Trending Topics
#13
Thanks guys! Some good things are coming next season
Also picked up a winter set of wheels decided to see how well it does in snow
https://www.youtube.com/watch?v=qGRh...ature=youtu.be
#14
Recently put on a shorty antenna the acura rdx, went to a dealer they wanted $18, on ebay i found oem brand new one for $10 shipped.
Part #39151STKA01
So for anybody looking to buy one here it is
http://www.ebay.com/itm/321236296166...84.m1439.l2649
Also i was going to buy a set of 2006 headlights off a local but deal fell through so i picked up the DEPO 2006 headlights, sti-r lenses, d2s 5000k bulbs, halos for the ironman mod, and top corner white LED PCB Replacement. I will update this once i get started on it
Part #39151STKA01
So for anybody looking to buy one here it is
http://www.ebay.com/itm/321236296166...84.m1439.l2649
Also i was going to buy a set of 2006 headlights off a local but deal fell through so i picked up the DEPO 2006 headlights, sti-r lenses, d2s 5000k bulbs, halos for the ironman mod, and top corner white LED PCB Replacement. I will update this once i get started on it
Last edited by VisualSeven; 12-22-2013 at 12:23 PM.
#15
Quick Update to what i was up to past couple days.
Working on redoing the headlights, got started on the depo 06 headlights.
So i bought clear STi-R lens from theretrofitsource.com
35watt 5000k D2s bulbs theretrofitsource.com
Zled top corner led bulbs
The progress is paused for now because im waiting for OEM nissan ballasts to come in for D2S bulbs, and i have to redo the wiring on the 2006 headlights because the main harness in my car is 6pin while the headlight is 8pin. Oh and i still need to get the glue out of the headlights so i can reseal them, that **** so damn sticky.
And here is what happened with the test pipe bungs... The bung broke in a half when i tried to unscrew the o2 too much rust
And there will be many many more goodies coming!
Working on redoing the headlights, got started on the depo 06 headlights.
So i bought clear STi-R lens from theretrofitsource.com
35watt 5000k D2s bulbs theretrofitsource.com
Zled top corner led bulbs
The progress is paused for now because im waiting for OEM nissan ballasts to come in for D2S bulbs, and i have to redo the wiring on the 2006 headlights because the main harness in my car is 6pin while the headlight is 8pin. Oh and i still need to get the glue out of the headlights so i can reseal them, that **** so damn sticky.
And here is what happened with the test pipe bungs... The bung broke in a half when i tried to unscrew the o2 too much rust
And there will be many many more goodies coming!
#19
Well after receiving the ballasts i was able to finally test out the light, i redid the wiring to 6pin because the new headlights were 8pin, it was pretty easy, but i also got help from one of the members from fb page. The hardest part of this whole headlight was resealing them back.
Here are couple pictures, don't mind the very blue picture my phone ****ed it up..
Here are couple pictures, don't mind the very blue picture my phone ****ed it up..
#20
I haven't driven the car in a month and a half so im fairly excited to finally get to finish it in 2 weeks !The progress is moving fairly slow because of work and the shitty Chicago weather, and other things in the schedule but here are some updates.
1. The headlights have been all finished after having some trouble with the passenger side light. Everything was fine, i sealed it and everything and then i found my hair stuck on the projector shroud! So i had to bake it open again and resealed it, i went to test if the halo worked and it didn't! WTF!! So i had to buy a new halo and resealed the light. And yes i tested the halo before resealing. My cars headlight harness is 6pin while those 06+ lights are 8pin so i had to cut off the 6pin connector and the 8 pin connector and rewire it, but it works all good now.
2. Front swaybar has been installed and the car has been lowered 1" front and 3/4" rear.
3. I ordered Nismo Rear Add ons (fiberglass) and i wasnt a fan of the fitment because it left a gap between the bumper and the nismo add on, so i had to apply bondo to fill in the gap, sand, prime, and just dropped it off at the body shop to get it painted. Should have it done tomorrow
4. In a week the weather should be in the high 20s so it will be good to get the test pipes installed, the old exhaust dropped, rear swaybar. And replace with the new goodies
1. The headlights have been all finished after having some trouble with the passenger side light. Everything was fine, i sealed it and everything and then i found my hair stuck on the projector shroud! So i had to bake it open again and resealed it, i went to test if the halo worked and it didn't! WTF!! So i had to buy a new halo and resealed the light. And yes i tested the halo before resealing. My cars headlight harness is 6pin while those 06+ lights are 8pin so i had to cut off the 6pin connector and the 8 pin connector and rewire it, but it works all good now.
2. Front swaybar has been installed and the car has been lowered 1" front and 3/4" rear.
3. I ordered Nismo Rear Add ons (fiberglass) and i wasnt a fan of the fitment because it left a gap between the bumper and the nismo add on, so i had to apply bondo to fill in the gap, sand, prime, and just dropped it off at the body shop to get it painted. Should have it done tomorrow
4. In a week the weather should be in the high 20s so it will be good to get the test pipes installed, the old exhaust dropped, rear swaybar. And replace with the new goodies
Last edited by VisualSeven; 02-06-2014 at 06:14 AM.