meanz

iTrader: (23)

Figured I would start one of these.

This is the day I picked it up. was missing engine, trans, driveshaft, and most of the interior.



towing back to south carolina


Made a little make shift garage out of a tarp from harbor freight and got to work.

meanz

iTrader: (23)

Installed an engine I found off craigslist out of an auto g35. Vortech not installed yet due to waiting on vortech to ship it back to me after the si upgrage.



Finally got it back and installed.


Next was to tackle the interior. Most of the dash was missing, thus the reason for the 2 toned. Also didn't have seats, so I installed some megan racing seats which fit like garbage and eventually ended up pulling them for stock leathers

meanz

iTrader: (23)

Got it back together and took her for spin around the block. This was right before I went to Afghanistan. I had the car towed to CIN Motorsports for a tune and to go over everything to make sure nothing was missed.

meanz

iTrader: (23)

Z put down 436/404 while using a BLV to dial down the boost to 11psi. Only got to drive it 1 time due to flying back overseas. While over there, decided to go ahead and build the engine.



They then asked if I wanted to do anything with the engine bay or anything. I told them to do what ever they wanted. This is what I got.

meanz

iTrader: (23)

They also helped out with a better and bigger intercooler, redid all my piping to larger diameter, changed up and upgraded all my pullies on the vortech bracket.



Also scored some Stance GR+ pros coils off the marketplace, along with some hotchkis sways and SPL endlinks.

meanz

iTrader: (23)

Car was putting down consistent 540-550 on their dyno and was time to bring home!

meanz

iTrader: (23)

Pulled off stock wheels and put on these rotas I painted gold.

meanz

iTrader: (23)

Car was home and I decided to finally put on my chargespeed sides that ive had for about a year..

meanz

iTrader: (23)

Then I decided I needed change. So the wheels went blue.

meanz

iTrader: (23)

Car started to act up a bit..had a short in my main engine harness and was still waiting on my 255 twin pump from cjm. Bobby drove to Greenville to pick up the z.


back at the shop


While retuning, found out the engine had a couple of cracks in the cylinders. Still pulled hard and making the same numbers. So back to pulling the engine again and rebuild..

meanz

iTrader: (23)

While at CIN decided to do a few things to the z while I could. First up was a legit set of wheels.

Sold the rotas and picked these up. 9.5F 255 and 10.5R285, love how these came out.

meanz

iTrader: (23)

Also with so much free time, decided to pull out the dash and door panels to swap them for some black ones.




Also pulled out the megan seat and sold them to replaced them with stock black leathers

meanz

iTrader: (23)

Then it was time to finally ditch my cheap hks rep exhaust and and megan test pipes. Found some tomei test pipes and tomei cat back that was kinda local for a good price.

meanz

iTrader: (23)

Decided to get my buddy Taywan to shave, repair, and paint my v2 front bumper for me. He did a great job at matching the pearl/flake.


He also painted my center console after I sanded it down and hydro dipped the gauges and cubby door in carbon fiber myself. Also added a black nismo ****. Don't have a pic installed but It looks great and matches my exterior 100%.

meanz

iTrader: (23)

My latest project was installing my carbon hr ts hood with nrg shocks and aerocatch hood pins.

meanz

iTrader: (23)

This is how it sits for now, I still have a few more things to do before im "finished" but it has come a long way.

XM 1

iTrader: (5)

looking good so far. keep up the good work!!

RUNWDVL

iTrader: (10)

Looking good!!

bottlefed97

iTrader: (1)

I love how the car looks now all except for the wing, but I've never been a fan of the v1. Nice job!

Bmurray350z

iTrader: (34)

lookin good josh! NACH is selling some chargespeed rear caps that would put the icing on the cake for your exterior haha