FS: Blue and Pollished everything (plenum/collector/covers/pipes/pulleys)
#1
Registered User
Thread Starter
Join Date: Mar 2017
Location: South Carolina
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Blue and Pollished everything (plenum/collector/covers/pipes/pulleys)
Worst day of my life....lol "tear"
Ok so, i know.. Im new. Sorry....long time reader, first time poster... and on such sad note.
Why? you might ask... you know that point we all swear we'll never hit... "selling the care for the betterment of the family" yeah well i hit that today.
Im selling all of this as a package. from my 2003 350z (which im going to be parting out for super cheap )
(3/30/17 IF YOU NEED OEM PARTS FOR A 2003 Manual 350z Silver... let me know.. send me the lowest Ebay "Buy It Now" link and subtract 35% of the price... so if lowest buy it now is $100 price is $65. Im not up-charging shipping but if you are trying to ship say the transmission... do your math first from Anderson, SC .... to ... yep, you guessed it... Where ever you want me to ship it to....)
heres the list of items in this package
-upper plenum (polished in and out)
-lower plenum (polished inside and down runners)
-lower collector (polished runners / painted 1000 degreee black);
-timing case cover (polsihed)
-all topside engine coolant pipes (painted 500 degree blue)
-pathfinder mod pipe + engine port connector + thermostat cover (500 degreee blue)
-Hard pipe coolant version of engine front bypass pipe (500 degreee blue)
cam covers (500 degree blue)
-Haste oversized radiator (i know its nothing super special)
-overflow container (polished)
-VMS lightweight crank pulley (china i think)
-knockoff headers (i know... i know you dont have to say it.)
-OEM pulleys (painted 500 degree blue)
-OEM alternator (painted and polished 500 degree blue)
-OEM throttle body (visable parts pollished + inside polished)
-OEM engine cover (painted 500 degree blue)
-right side fan (paiinted 500 degree blue)
-ac compressor bracket (polished)
if i did not list it, and its in the pictures...its still included in the package...
some info. I polished everything myself, and painted everything myself
paint went on 4 coats deep, and EVERYTHING with paint got flameproofed 3 coats then baked (except plastic pieces)
As this is a whole bunch of stuff. If you interested... pm me, and we can skype and you can see the the parts close up... (my computer and Skypecam are actually in my garage, so feel free to pm me for my skype and you can get a good close up look)
Lastly, Pricing out all pieces for this would have been horrible, so price is as follows:
reduced to $1500!!!! or send me an offer...
I would be scared buying from a newb like me, so like I said, if your interested...lets Skype, and escrow,
as far as shipping goes, buyers responsible, but i will gladly drop off at any carrier. I dont markup shipping so , i can weight out and measuer all of the boxes, so buyer can send ups/fedex pre-paid slips over email... It will be shipping from Anderson SC...
ADDITIONAL NOTE ---- 3/30/17 -----
forgot to put cold air intake in the photo.... behind wheel type... reply, or pm if you want me to post pics.
Ok so, i know.. Im new. Sorry....long time reader, first time poster... and on such sad note.
Why? you might ask... you know that point we all swear we'll never hit... "selling the care for the betterment of the family" yeah well i hit that today.
Im selling all of this as a package. from my 2003 350z (which im going to be parting out for super cheap )
(3/30/17 IF YOU NEED OEM PARTS FOR A 2003 Manual 350z Silver... let me know.. send me the lowest Ebay "Buy It Now" link and subtract 35% of the price... so if lowest buy it now is $100 price is $65. Im not up-charging shipping but if you are trying to ship say the transmission... do your math first from Anderson, SC .... to ... yep, you guessed it... Where ever you want me to ship it to....)
heres the list of items in this package
-upper plenum (polished in and out)
-lower plenum (polished inside and down runners)
-lower collector (polished runners / painted 1000 degreee black);
-timing case cover (polsihed)
-all topside engine coolant pipes (painted 500 degree blue)
-pathfinder mod pipe + engine port connector + thermostat cover (500 degreee blue)
-Hard pipe coolant version of engine front bypass pipe (500 degreee blue)
cam covers (500 degree blue)
-Haste oversized radiator (i know its nothing super special)
-overflow container (polished)
-VMS lightweight crank pulley (china i think)
-knockoff headers (i know... i know you dont have to say it.)
-OEM pulleys (painted 500 degree blue)
-OEM alternator (painted and polished 500 degree blue)
-OEM throttle body (visable parts pollished + inside polished)
-OEM engine cover (painted 500 degree blue)
-right side fan (paiinted 500 degree blue)
-ac compressor bracket (polished)
if i did not list it, and its in the pictures...its still included in the package...
some info. I polished everything myself, and painted everything myself
paint went on 4 coats deep, and EVERYTHING with paint got flameproofed 3 coats then baked (except plastic pieces)
As this is a whole bunch of stuff. If you interested... pm me, and we can skype and you can see the the parts close up... (my computer and Skypecam are actually in my garage, so feel free to pm me for my skype and you can get a good close up look)
Lastly, Pricing out all pieces for this would have been horrible, so price is as follows:
reduced to $1500!!!! or send me an offer...
I would be scared buying from a newb like me, so like I said, if your interested...lets Skype, and escrow,
as far as shipping goes, buyers responsible, but i will gladly drop off at any carrier. I dont markup shipping so , i can weight out and measuer all of the boxes, so buyer can send ups/fedex pre-paid slips over email... It will be shipping from Anderson SC...
ADDITIONAL NOTE ---- 3/30/17 -----
forgot to put cold air intake in the photo.... behind wheel type... reply, or pm if you want me to post pics.
Last edited by Gavintfn; 03-30-2017 at 12:48 AM. Reason: Forgot to list cold air intake... included no price change...
#4
Registered User
Thread Starter
Join Date: Mar 2017
Location: South Carolina
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
No, sorry... That was going to happen next... : ( I was sooo pumped about rebuilding since the block and the the heads were almost done.... but, alas... the wifes dream or ruining my dream, to help her with her other dream... of us buying another house (i said i will rent forever after the last) isis comming true for her...lol...
#7
Registered User
Thread Starter
Join Date: Mar 2017
Location: South Carolina
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Ask and you shall receive
yes the company and order information is in the attached image...
to be clear, when I say "knockoff" headers, or any part from that you can find on ebay or like.... I mean the following...
as of late (post 2005) many US companies send parts off to china to be either initailly produced or "Reproduced" obviously, in bulk... We see many knockoffs because while in possessions of the the part, the chinese companies obviously are aware of the construction or fabrication of the product, and "conveniently" dont have to follow or adhere to US product patenting laws. so the company orders lets say "headers", the chiniese company contracted to make the headers, simply doubles the order +/- , sits on the parts for a few lweeks, a few months...and then send it off to a us subsidiary, under a different part number or brand name than was originally contracted them to make the part.
so, while the part is Litereally, most likely made exactly the same as the more expensive products...Its a shitty thing to do, steal the designs that the us companies have created. unfortunately, we have been doing it to them for years... but all in all... in this specific case im ok with that proces..... only though , because these headers were given to ma as a gift.
I'm thinking they knocked off meghan racing though..... cant be sure...
to be clear, when I say "knockoff" headers, or any part from that you can find on ebay or like.... I mean the following...
as of late (post 2005) many US companies send parts off to china to be either initailly produced or "Reproduced" obviously, in bulk... We see many knockoffs because while in possessions of the the part, the chinese companies obviously are aware of the construction or fabrication of the product, and "conveniently" dont have to follow or adhere to US product patenting laws. so the company orders lets say "headers", the chiniese company contracted to make the headers, simply doubles the order +/- , sits on the parts for a few lweeks, a few months...and then send it off to a us subsidiary, under a different part number or brand name than was originally contracted them to make the part.
so, while the part is Litereally, most likely made exactly the same as the more expensive products...Its a shitty thing to do, steal the designs that the us companies have created. unfortunately, we have been doing it to them for years... but all in all... in this specific case im ok with that proces..... only though , because these headers were given to ma as a gift.
I'm thinking they knocked off meghan racing though..... cant be sure...
Trending Topics
#9
Registered User
Thread Starter
Join Date: Mar 2017
Location: South Carolina
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
More additional pics <<<<<
engine cover
pulley
lower runners
runners flame proffed and baked like 5 times...lol
header pic
header pic
header pic
i've seen worse welds from Chinese sweatshops....
the most painful part....<br/>the pathfinder mod.... tear!<br/> 7 hours in 43 degree rain and mud yanking the motor from a wrecked pathfinder from a junk yard, on a tip from a friend......Though a small flask of scotch would have been enough to keep me warm that day.....wrong... <br/>for future reference and edification of all... dont drop your 19v impact wrench in a mud puddle....it may survive water.... but not mud.. and the bonus... no more impact wrench in the rainy mud : (