Jenvey Individual Throttle Body Intake for VQ35DE
07-02-2012, 04:51 PM
#1
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Jenvey Individual Throttle Body Intake for VQ35DE
Jenvey Individual Throttle Body Intake Manifold
I am selling my VQ35DE Jenvey Intake System.
Included:
Lower and Upper intake.
6 Individual Throttle Bodies
6 Piper Cross Intake Filters for each Intake Horn
Custom Fuel Rail
More Pictures below. My username/date shot.
Everything is made to fit perfectly on a VQ35DE Engine. I had mine in my 2002 Nissan Sentra which had a Nissan Maxima engine swapped into it. With the intake the car made 315NA at the wheels. I was running it on a built motor revving to 8000RPM. The car was converted to drive by cable which is required for this type of setup. Professional tuning will be required to balance out the intake upon purchasing. You will also need to create custom vacuum lines. I can send you the custom made vacuum block created for this setup. Please contact me with any questions regarding this. Huge power gains are made by have an individual intake system. Please see dyno videos and pictures below. Original cost of this system is $2900, I've only placed 1000 miles if even on the setup. Have to start parting out the car to pay for school can't afford to put more money in it. Good luck to the next owner for Naturally Aspirated madness!
I am selling my VQ35DE Jenvey Intake System.
Included:
Lower and Upper intake.
6 Individual Throttle Bodies
6 Piper Cross Intake Filters for each Intake Horn
Custom Fuel Rail
More Pictures below. My username/date shot.
Everything is made to fit perfectly on a VQ35DE Engine. I had mine in my 2002 Nissan Sentra which had a Nissan Maxima engine swapped into it. With the intake the car made 315NA at the wheels. I was running it on a built motor revving to 8000RPM. The car was converted to drive by cable which is required for this type of setup. Professional tuning will be required to balance out the intake upon purchasing. You will also need to create custom vacuum lines. I can send you the custom made vacuum block created for this setup. Please contact me with any questions regarding this. Huge power gains are made by have an individual intake system. Please see dyno videos and pictures below. Original cost of this system is $2900, I've only placed 1000 miles if even on the setup. Have to start parting out the car to pay for school can't afford to put more money in it. Good luck to the next owner for Naturally Aspirated madness!
07-02-2012, 05:56 PM
#4
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Yes they will fit under the Z hood, I am asking 2400 shipped. And you will have to adjust your tune for them too of course. They are cable driven so you'll need to convert to drive by cable.
Last edited by kgkeen101; 09-10-2012 at 03:53 PM.
07-04-2012, 06:09 AM
#5
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Bump for Serious NA builder, this kit with filters is 3000$ from the UK, you are getting a great deal on it if you are going to be going all out NA!
07-08-2012, 01:57 PM
#6
Registered User
iTrader: (11)
Join Date: Apr 2008
Location: Texas, Mass, Florida
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
Dammmm..! I would luv to have those in my motor...but getting boosted would cost about the same and make more power...I know this for NA for better reliability but it's tough to find a good shop that knows how to tune ITB's...glws...i would've like to have seen this if i was still living in FL...
Trending Topics
07-09-2012, 09:07 AM
#9
Dammmm..! I would luv to have those in my motor...but getting boosted would cost about the same and make more power...I know this for NA for better reliability but it's tough to find a good shop that knows how to tune ITB's...glws...i would've like to have seen this if i was still living in FL...
pretty nice but i'd rather go boost
07-13-2012, 01:53 PM
#13
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
08-10-2012, 07:51 AM
#20
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Everything is packed and ready to ship, all parts made to plug and play on. These modifications were made here in south Florida and cost me a bit in labor to make work properly. PM me for a shipping quote. going to post the vacuum surge tank that was upgraded