87mm TB Project
#422
Well the Kinetix Velocity did everything I thought it would. It cleared up my top end issues. Doesn't fall on its face so much like it did before. Car is at 291whp now. Always something though...having issues with the MAF reading sporadic voltages now making it really difficult to properly dial in the AFR. It jumps around several tenths as RPM increases instead of being a nice steady increase with RPM like it did last year. I am going to try cleaning it and moving it to a different location and try again in a few weeks at the track. If I can get that cleared up, I will be able to dial in the AFR better and pick up more power. I think 300whp is within reach.
Last edited by Fixxxercask; 07-04-2016 at 05:17 AM.
The following users liked this post:
Fixxxercask (07-04-2016)
#427
Yes, I've had idle issues. Had to drill a hole in the blade because Uprev's TB table seems useless.
On my previous modded intake (OEM plenum) my MAF voltages were normal and were linear through the RPM band. I am having issues with sporadic MAF voltages now making it really difficult to tune. I still need to figure it out. I have re-positioned the MAF, swapped for a known good one and still no luck. I am not sure what it could be. I need to put the stock intake and plenum back on to make sure it reads ok with that just to make sure its not some electrical issue.
On my previous modded intake (OEM plenum) my MAF voltages were normal and were linear through the RPM band. I am having issues with sporadic MAF voltages now making it really difficult to tune. I still need to figure it out. I have re-positioned the MAF, swapped for a known good one and still no luck. I am not sure what it could be. I need to put the stock intake and plenum back on to make sure it reads ok with that just to make sure its not some electrical issue.
#428
350Z-holic
iTrader: (13)
subscribed so I don't have to google it every time I want to reference the thread!
#430
Did anyone else have any luck with an 87mm TB ?
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM