wls350

I use a Nitrous express maximizer 4,
Nos is set to start at 3750 room and shut of at 6950 rpm,
Then I bring the Nos in with about 30% and ramp it up as it increases in rpm.
That way it's progressive, also set it to chase a specific wide band so set that to 11.5 and let it chase the afr.
Place emphasis on safety and enjoy it, personally bringing gas in so low is just adding so much strain on your motor.
You want the gas coming in closest to the torque peak as possible

Sent from my GT-I9300 using IB AutoGroup

raybot

ok so because I know that my kit have a WOT but is that also function as a window switch that only engage at 2500rpm and shut of before limiter?
or do I have to buy a window switch itself??

wls350

Buy a proper controller and stop messing around, 2500 rpm is literally looking for ****..

Sent from my GT-I9300 using IB AutoGroup

IV_SD_350Z

And bringing it back to life.....again..... anyone have anything to add?

r3zon8

iTrader: (3)

there should be plenty of 350z specific kits available today. its a simple install, just make sure whatever kit you have comes with the fuel tap. AAM makes their own but im sure there are clones/alternatives by now.

r3zon8

iTrader: (3)

Other upgrades for 'safe measure':

-Spark Plugs

spooncer_DK

So I want to know what nitrous kit i should get. I definitely want a wet system but which is best for the 350z? its a 2003 and im currently working on the engine. The max shot i"d use would be 200 (i'd probably just have a 100 in there most of the time), would getting better connecting rods be enough for the engine to keep it safe? any help would be great

3hree5ive0ero

iTrader: (95)

Brands are mostly a matter of preference. Read through this thread if you haven't already.

JustinZ33

I have a nitrous express kit and I have a 75 shot ( 41/22 ) in each intake but the installer said it still would only equal a 75 but now people are saying I have been running a 150 this whole time my car has been untuned on the 75 shot for about 2 or 3 months and I have went through at least 10 bottles so my question is have I been running a 150 shot untuned this whole time?

1973camarolt

iTrader: (1)

Contact NX themselves and ask, to be certain. You can measure the mass flow rate of nitrous and calculate the horsepower gains from there with your AFR and an assumed combustion efficiency. We do this with our race car:

https://www.flickr.com/photos/593as/...ream/lightbox/

JustinZ33

I have getting so many different things even from NX I just want input from someone who has it so I can know for sure this is frustrating as hell

3hree5ive0ero

iTrader: (95)

150 shot

juicinjake

iTrader: (6)

yes... with that jetting you have been running around on 150hp shot untuned. that is correct. id pull your plugs and look for little speckles of aluminum embedded in the plug (caused by detonation).

Yaaaayaaaay35

I have a NOS kit from Holley for my car,
Called them and they said for a 100shot to run
Nitrous - 51, fuel - 34
And for 125 shot
Nitrous - 65, fuel - 38

Does this sound correct to anyone?
Just wanted some insight on this

Thanks

3hree5ive0ero

iTrader: (95)

I strongly suggest that you start with the recommended size and monitor the AFR (via gauge or dyno) to fine tune it. Don't just put in the jets they tell you to without checking the AFR.

Yaaaayaaaay35

So what would the recommended sizes be for a 100 shot? because those are the sizes Holley gave me.

Conway_160

iTrader: (1)

He is saying run what holly says to run but ensure you use a afr guage to monitor it. All cars run diff so you may have to add or pull fuel.

nismo_ninja

For the op can the uprev do the same thing as the utec for nitrous tuning? Im very new to the idea of nos read the first post and scrolled through some but utec is discontinued and i have a uprev

BakaN20

iTrader: (26)

Uprev can have multiple maps, one for your N/A tune, and another for your nitrous tune, where timing is not as aggressive.

Z-olaf

So I'm looking at buying this
https://www.amazon.com/Nitrous-Expre...ds=nitrous+kit

And buying the obvious things like pressure gauge, etc.. Or

https://www.amazon.com/Nitrous-82220...0z+nitrous+kit

Which is made specifically for the 350z, but I'm not sure if it's worth the extra $200 for what it's offering. Any input into the two, and what more I'll need to buy with either recommended kit?