You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Is there any good Nissan Tuners in the Tri-state area, I am looking to get my maxima tuned vq35de, I looked on the org, and didn't see anything appealing. I am considering sending the ecu off to technosquare but not sure If it be worth it to get that.
There is a member on the org that has made a PNP harness for a UTEC, I am either looking to get that or a Haltech maybe a Greddy E-manage system, but heard the e-manage system aren't to friendly with maxima ecu's. if anyone could give me some idea's that be great.
The only reason I post on here is due to the fact that are engines are 99& Identical, just different lengths in blocks. everything else is the same motor wise etc. I am looking at Hydra's as well, apparently there isn't one for the maxima but they said they could put together one depending on what mods I have or how much boost Id be running.
Last edited by StillenGle; 10-03-2009 at 01:17 PM.
Hey Stillengle....we can certainly take care of ya, we have been working with Uprev to bring more maxima Roms available for tuning. what year and trim level do u have??
Let me know and maybe we can start to get more and more roms done for u maxima guys...
Hey Stillengle....we can certainly take care of ya, we have been working with Uprev to bring more maxima Roms available for tuning. what year and trim level do u have??
Let me know and maybe we can start to get more and more roms done for u maxima guys...
Thanx for the good words.... 03threefiftyz...
Thanks for the response vince, I have an 03 GLE, But I am looking to get an 6 speed soon. If I am not mistaken UpRev, had previously tried to make maps etc for the maxima's but they were to big or the ecu wouldn't accept the whole map.
Thanks for the response vince, I have an 03 GLE, But I am looking to get an 6 speed soon. If I am not mistaken UpRev, had previously tried to make maps etc for the maxima's but they were to big or the ecu wouldn't accept the whole map.
Nothing to do with it being a Maxima, just that the Maxima doesn't start using the newer style Nissan ECU till later. AFAIK Nissan switched the Maxima to the new ECU in 2005. Don't quote me on that as we still have yet to see a Maxima at our shop to verify, but thats what I've been told.
On the 03 I'd just take it to Vince at RT and let him have a go at it. He'll be honest with you about your options and you'll have to decide which is the best way to go for your particular situation.
Nothing to do with it being a Maxima, just that the Maxima doesn't start using the newer style Nissan ECU till later. AFAIK Nissan switched the Maxima to the new ECU in 2005. Don't quote me on that as we still have yet to see a Maxima at our shop to verify, but thats what I've been told.
On the 03 I'd just take it to Vince at RT and let him have a go at it. He'll be honest with you about your options and you'll have to decide which is the best way to go for your particular situation.
Yes you are correct, it was the 04-05 They started using the different connectors for the ecu's, the 04-05 use the 350z connectors so do the altima's i believe. There's a guy over on the org, that's making a PNP harness for the Haltech/UTEC.
Bringing this back from the dead. Has anyone heard of Vinny Ten Racing?
VTR does good work, but is costly and IMO not worth it when you can take it to shop like R/T just over in Lansdale. It will be much easier for you than heading up to Long Island. A friend of mine just had his GTR modded at VTR and it came out really good, but R/T is a top notch facility.
__________________
PPW 03 Enthusiast 6spd Vortech
Last edited by chrisjersey06; 06-10-2010 at 07:28 AM.
Thank's Iam Familiar with Akuma. the owner use to work for cobb. there near englishtown i believe
Quote:
Originally Posted by chrisjersey06
VTR does good work, but is costly and IMO not worth it when you can take it to shop like R/T just over in Lansdale. It will be much easier for you than heading up to Long Island. A friend of mine just had his GTR modded at VTR and it came out really good, but R/T is a top notch facility.
thanks man. their isn't a whole lot you can do to a maxima that's the problem. there's nothing really there for tuning.
thanks man. their isn't a whole lot you can do to a maxima that's the problem. there's nothing really there for tuning.
There are people out there with some pretty well modded Maximas. I had a 2001 SE 5-spd years ago that I bought new, and there were people who would show up to meets putting down some serious numbers on all generations of those cars. I never drove one of the 3.5's, but I can imagine it bridges the gap between the 01 that I had, and a 350Z in terms of power.
There are people out there with some pretty well modded Maximas. I had a 2001 SE 5-spd years ago that I bought new, and there were people who would show up to meets putting down some serious numbers on all generations of those cars. I never drove one of the 3.5's, but I can imagine it bridges the gap between the 01 that I had, and a 350Z in terms of power.
Yea the VQ35's got power for sure. I have yet to drive a 7th gen. I've been throwing around the idea of getting a 6 speed maxima. I don't know, I've been looking at a lot of cars lately.
Don't get me wrong my 03 GLE is nice, I just want a stick shift.
Last edited by StillenGle; 06-10-2010 at 11:39 AM.
ahh an org member here. cool...im using the greddy emanage ultimate for my 4th gen with a 3.5 swap but it's street tuned..i should get it tuned though but was planning to go to SI at ripp performance or something like that...from what my friend told me they do really good work there.
you should do a 6spd swap..someone on nycmax is selling a brand new 6spd trans!
__________________
1999 Maxima cammed vq35 with a few other goodies | 04.5 350z Track| www.teamalloutnissan.com
Last edited by maximariceboi; 06-13-2010 at 06:42 AM.
ahh an org member here. cool...im using the greddy emanage ultimate for my 4th gen with a 3.5 swap but it's street tuned..i should get it tuned though but was planning to go to SI at ripp performance or something like that...from what my friend told me they do really good work there.
you should do a 6spd swap..someone on nycmax is selling a brand new 6spd trans!
I have though of that, but it's kind of alot of money for the swap.
RT Tuning Lansdale PA...Vince will take care of all your needs
__________________
2003 DB Track Vortech SC dynoed at 424rwhp 340 rwtq with 3.12 pulley|VOLK|AEM|NISMO|RECARO|BREMBO|Eibach|Tokico|Kinitex|Ta kata|Cusco
EFI Logics in CT is great!
THey are known for subbie tuning but they are great with nissan's.
I recently got my 370z tuned there by Chris!
Give them a call!
NJ Tuners
