McKinney Motorsports

USN HM 350Z · 01-25-2008, 03:37 PM

Has anyone done any business with them? I am looking to get a RB26DETT with transmission and I noticed them in the newest issue of Nissan Sport Magazine.

They are located in southern California and it looks like they have done a lot of big projects.

Thanks in advance guys

Oleg · 01-25-2008, 04:01 PM

What in the bloody hell are you building this time?

USN HM 350Z · 01-25-2008, 04:04 PM

Quote:

Originally Posted by Oleg

What in the bloody hell are you building this time?

hahahahaha, you will have to wait and see.

vqturbotec · 01-25-2008, 04:55 PM

Please tell me you are concidering a awd rb26 350z

WA2GOOD · 01-25-2008, 05:29 PM

McKinney Motorsports seem to be some good guys, they do alot of buisness with Jim Wolf. I am sure he can vouch for them. Call him and ask.

USN HM 350Z · 01-25-2008, 05:51 PM

Quote:

Originally Posted by vqturbotec

Please tell me you are concidering a awd rb26 350z

nope. It is in the Nissan family though

vqturbotec · 01-25-2008, 05:56 PM

Quote:

Originally Posted by USN HM 350Z

nope. It is in the Nissan family though

If its in anything besides a skyline its a winner in my book.

IntenseFab · 01-25-2008, 07:37 PM

Quote:

Originally Posted by USN HM 350Z

Has anyone done any business with them? I am looking to get a RB26DETT with transmission and I noticed them in the newest issue of Nissan Sport Magazine.

They are located in southern California and it looks like they have done a lot of big projects.

Thanks in advance guys

Yes we tuned their 240sx SR20DET on the ProEFI 48 Pin ECU

They had their trailer camped out at our shop for about a week and we had the pleasure of entertaining their driver for the time..

Mack and Grumpy are great/honest people.

I have one of their tranny mounts in my 240! Nothing like a 2800lb car w/ a VQ 8-)

USN HM 350Z · 01-25-2008, 07:45 PM

Quote:

Originally Posted by IntenseFab

Yes we tuned their 240sx SR20DET on the ProEFI 48 Pin ECU

They had their trailer camped out at our shop for about a week and we had the pleasure of entertaining their driver for the time..

Mack and Grumpy are great/honest people.

I have one of their tranny mounts in my 240! Nothing like a 2800lb car w/ a VQ 8-)

great. I have been e-mailing with Mack today. Seems very much on the up and up with what I am looking to do. I will probably be contacting you guys also about the ProEFI, if you all can help on that.

Im also talking with them about a possible SR20DET

IntenseFab · 01-25-2008, 07:55 PM

Quote:

Originally Posted by USN HM 350Z

great. I have been e-mailing with Mack today. Seems very much on the up and up with what I am looking to do. I will probably be contacting you guys also about the ProEFI, if you all can help on that.

Im also talking with them about a possible SR20DET

Yeah if you are going SR definitely contact us about the ProEFI we've had amazing results with the SR with the 2871R.. If you want some dyno's I can email them to you if you PM me

Hell we had some amazing results tonight with the VQ35 8-) thats for a new thread though..

alty319 · 01-26-2008, 09:47 AM

Mack is a great guy over there..he has so much insight on the rb's..i find myself talking to him all the time about what i should do next..he has a lot of info and knowledge..even after your future project he'd be more than happy to help you work out whatever you need for your car.

Zexy · 01-26-2008, 10:41 AM

They're gonna charge you $25k. If i were you i'd def. go with a 2JZ instead of RB. RB26 parts are $$$$ and not always readily available as 2JZ ones.

USN HM 350Z · 01-26-2008, 12:17 PM

Quote:

Originally Posted by Zexy

They're gonna charge you $25k. If i were you i'd def. go with a 2JZ instead of RB. RB26 parts are $$$$ and not always readily available as 2JZ ones.

actually you are way over on the price. WAY OVER. If you dont have facts and know about the company please dont post ill informed comments

USN HM 350Z · 01-26-2008, 12:18 PM

Quote:

Originally Posted by alty319

Mack is a great guy over there..he has so much insight on the rb's..i find myself talking to him all the time about what i should do next..he has a lot of info and knowledge..even after your future project he'd be more than happy to help you work out whatever you need for your car.

yeah, I have been corresponding with him since yesterday. Im still not sure about the RB due to the weight of the motor. I am also considering an SR20DET at this point.

Zexy · 01-26-2008, 01:05 PM

Quote:

Originally Posted by USN HM 350Z

actually you are way over on the price. WAY OVER. If you dont have facts and know about the company please dont post ill informed comments

Ill informed? I personally called them and talked to them before since i was actually going to do the swap. I'm more informed about all of this.. More than you are. Chill out buddy,

USN HM 350Z · 01-26-2008, 01:27 PM

Quote:

Originally Posted by Zexy

Ill informed? I personally called them and talked to them before since i was actually going to do the swap. I'm more informed about all of this.. More than you are. Chill out buddy,

funy because a full swap is 14K. go troll somewhere else. I just finished talking with Mack

Vash350Z · 01-26-2008, 02:50 PM

Quote:

Originally Posted by Zexy

Ill informed? I personally called them and talked to them before since i was actually going to do the swap. I'm more informed about all of this.. More than you are. Chill out buddy,

I dont think USN is planning on putting this into a 350z, it actually says so a few posts up

ktown z · 01-26-2008, 07:18 PM

What car is this going into? My guess is a 240z with thier rb or sr mounts! I will be putting a RB26 into my 240z using thier mounts.

Zexy · 01-26-2008, 07:31 PM

Quote:

Originally Posted by USN HM 350Z

funy because a full swap is 14K. go troll somewhere else. I just finished talking with Mack

Yer so kewl!

USN HM 350Z · 01-26-2008, 07:48 PM

Quote:

Originally Posted by ktown z

What car is this going into? My guess is a 240z with thier rb or sr mounts! I will be putting a RB26 into my 240z using thier mounts.

nope, not a 240Z, or a 260 or even a 280.

The project will be released to the public in the near future.

01-25-2008, 03:37 PM	#1
USN HM 350Z Super Moderator MY350Z.COM Join Date: Nov 2004 Location: San Diego 92119 Posts: 19,204 iTrader: (108)	McKinney Motorsports Has anyone done any business with them? I am looking to get a RB26DETT with transmission and I noticed them in the newest issue of Nissan Sport Magazine. They are located in southern California and it looks like they have done a lot of big projects. Thanks in advance guys __________________ -2008.5 Nissan Titan SE CST 4" spindle lift/Bilstein Shocks/JBA Exhaust/Volant Intake/HyperTech Beta Test Unit/N-Fab Steps/HID Lights Headlights & Driving lights/ BullBar with KC High Lights -2006 Mazda Miata MX-5* Bilstein shocks/ Eibach springs -1975 S30 Right Hand Drive Fairlady Z(Project Car)* SR20DETT swap coming soon -2004 Nissan 350Z JWT TT (Gone, but not forgotten)*

01-25-2008, 04:01 PM	#2
Oleg Registered User Join Date: Mar 2005 Location: Room full of blood Posts: 2,384 iTrader: (1)	What in the bloody hell are you building this time? __________________ **Not drinking is not a solution either**

01-26-2008, 10:41 AM	#12
Zexy Registered User Join Date: Nov 2004 Location: Hotlando 407/UCF Posts: 5,393 iTrader: (54)	They're gonna charge you $25k. If i were you i'd def. go with a 2JZ instead of RB. RB26 parts are $$$$ and not always readily available as 2JZ ones. __________________ ΣΛΒ COAST TO COAST

01-26-2008, 07:18 PM	#18
ktown z Registered User Join Date: Feb 2003 Location: Killeen, Texas Posts: 397 iTrader: (8)	What car is this going into? My guess is a 240z with thier rb or sr mounts! I will be putting a RB26 into my 240z using thier mounts. __________________ Cosworth Heads, Race bearings, JWT cams, Arias Pistons, Eagle Rods, HKS HG, ARP L19 studs, GReddy twins, FMIC, Profec E01, 2 Type RS BOV, HKS-FCON, TS reflash, Walbro 255lph pump, 650cc injectors, AAM return system and oil pan spacer, Grounding cables, Fluid damper, SVR tech 3" turbo back with WG dumps, PWR Rad, Carbonetics twin disc, Crawford manifold, 3.3 FD, Veilside front lip, 07' heads+tails, Catskin leather, Volk face 2 19" GTC's, some stereo stuff

01-25-2008, 04:55 PM	#4
vqturbotec Registered User Join Date: Mar 2007 Location: San Diego Posts: 266 iTrader: (0)	Please tell me you are concidering a awd rb26 350z

01-25-2008, 05:29 PM	#5
WA2GOOD Banned Join Date: Dec 2004 Location: San Diego Posts: 1,577 iTrader: (26)	McKinney Motorsports seem to be some good guys, they do alot of buisness with Jim Wolf. I am sure he can vouch for them. Call him and ask.

01-26-2008, 09:47 AM	#11
alty319 Registered User Join Date: Sep 2005 Location: NH Posts: 11 iTrader: (0)	Mack is a great guy over there..he has so much insight on the rb's..i find myself talking to him all the time about what i should do next..he has a lot of info and knowledge..even after your future project he'd be more than happy to help you work out whatever you need for your car.