Forged Performance: APS TT Tuner Kit Stock Block

Sharif@Forged · 09-14-2008, 07:31 PM

We just wrapped up a nice APS TT Tuner kit on what was once a 100% bone stock 350Z Roadster. These are our favorite transformations...the smile on the customer's face is always priceless.

Took us 4 days to complete the install, and another couple days for tuning and thorough road testing/tuning. The car runs like OEM, but with an additional 175whp at the wheel.

In fact, if you look through the engine bay, you'll be hard pressed to find any signs of engine removal.

The new APS Tuner kits are very impressive, and you really get a lot for your money. The newer kits include dual Tial external wastegates, large 3 inch downipes, and standard water cooled/oil cooler turbochargers (non BB). For under $5500, it makes for a really nice tuner package.

Spec Sheet:
APS TT Tuner Kit
UTEC EMS
UTEC Boost Control Solenoid
Map Selector Switch (low and high boost maps)
DW 600cc Injectors
Walbro Fuel Pump and Modified Fuel Pump Assembly
Greddy Evo TiC TT Exhaust

Here are a few pics...enjoy!
Engine Bay Prepped and Ready for Install

genegoesfast · 09-14-2008, 07:37 PM

supa clean sharif!

blueper4mancez · 09-14-2008, 07:47 PM

nice sleeper for sure .

midz350 · 09-14-2008, 07:57 PM

excellent work like always.

SirSpeedyZ · 09-14-2008, 08:18 PM

sweet kit, nice numbers too

D-tuned · 09-15-2008, 06:05 AM

Sharif what psi spring comes in those wastegates? how much PSI were you running for the power levels on the dyno sheets?

craigo'sznprgrs · 09-15-2008, 07:29 AM

Where are all the vacuum lines

?

I keed, looks great, lol.

JAM3Z · 09-15-2008, 07:32 AM

Excellent work as always.

Sharif@Forged · 09-15-2008, 07:38 AM

Quote:

Originally Posted by D-tuned

Sharif what psi spring comes in those wastegates? how much PSI were you running for the power levels on the dyno sheets?

8.5psi on the high boost, and 7psi on the low boost (wastegate pressure). Those Tial WG's are preloaded with .6 BAR springs, I am assuming, so a little more base boost than a typical Greddy kit.

chris'smax · 09-15-2008, 07:39 AM

Quote:

Originally Posted by JAMEZ@CiNcity

I can haz sex w/ joo?

I keed I keed

JAM3Z · 09-15-2008, 07:41 AM

Quote:

Originally Posted by chris'smax

I keed I keed

WAT?!!!

chris'smax · 09-15-2008, 07:48 AM

Quote:

Originally Posted by JAMEZ@CiNcity

WAT?!!!

no no, not me. You and sharif

JAM3Z · 09-15-2008, 07:50 AM

Quote:

Originally Posted by chris'smax

no no, not me. You and sharif

Oh boy....
Sharif is taken by someone who is (arguably) more attractive than me. Plus, it should go without saying that I don't swing that way.

However, last time I talked to Jeremy he was single, so you might try your luck with him

.

chris'smax · 09-15-2008, 07:53 AM

Quote:

Originally Posted by JAMEZ@CiNcity

Oh boy....
Sharif is taken by someone who is (arguably) more attractive than me. Plus, it should go without saying that I don't swing that way.

However, last time I talked to Jeremy he was single, so you might try your luck with him

.

lol i already tried, but he turned me down for some D1 model

.

I was just trying to get a discount on my install

JAM3Z · 09-15-2008, 08:00 AM

Quote:

Originally Posted by chris'smax

lol i already tried, but he turned me down for some D1 model

.

I was just trying to get a discount on my install

I hear roofies can work wonders.

midz350 · 09-15-2008, 12:07 PM

Sharif..do you think the exhaust manifold will bolt up to the HR?

Nexx · 09-15-2008, 12:15 PM

excellent work as usual from the forged staff! aps makes highly stuff.

blackz123 · 09-15-2008, 12:17 PM

ive been lookin into turbos so far ive narrowed it to aps or power enterprise ugh so hard aha

XKR · 09-15-2008, 12:42 PM

Very clean work... i like it.

thekinn · 09-15-2008, 01:19 PM

Nice

If I had loads of cash to throw at my car - this would be my choice... along with suspension and BBK.

I can dream..