F/I strains engine?
#101
Registered User
iTrader: (4)
plus again your point is irrelevant because AMS still uses a billet aluminum block in the alpha omega and has no problems, when you figure cylinder pressures and power per bearing surface that engine is about on par with a 3k hp pro mod v8 as far as mechanical stresses on the engine.
edit:NM i looked it up and looks like you parted out your setup, so you never even finished your car and your telling a guy who builds pro mods and similar high level cars and currently expanding now, vehicles that make double your old goal, that he is wrong on the subject of high powered vehicles.....
edit:NM i looked it up and looks like you parted out your setup, so you never even finished your car and your telling a guy who builds pro mods and similar high level cars and currently expanding now, vehicles that make double your old goal, that he is wrong on the subject of high powered vehicles.....
Last edited by jerryd87; 06-25-2016 at 05:35 PM.
#103
Registered User
iTrader: (4)
what a ****** im the only one on this forum who has any clue what he is talking about so i have "small dick syndrome" what the **** ever dude.
this is the same attitude everyone had the FIRST time i showed up on this board when i told everyone exactly why they where having issues with built engines and only a couple people realize that what is now gospel is what i first introduced here.
come see me when you have ever had anything pushing 1k+ whp let alone the **** i build now
this is the same attitude everyone had the FIRST time i showed up on this board when i told everyone exactly why they where having issues with built engines and only a couple people realize that what is now gospel is what i first introduced here.
come see me when you have ever had anything pushing 1k+ whp let alone the **** i build now
Last edited by jerryd87; 06-26-2016 at 05:53 AM.
#105
Registered User
iTrader: (4)
right your just being a jealous *** troll or is it because you think your something special having a slow *** vette? you seriously bought a z06? what a complete waste of money. good job buying the worst ls engine ever made.
Last edited by jerryd87; 06-26-2016 at 06:21 AM.
#107
Registered User
iTrader: (4)
yah not a troll or not jealous just use the EXACT response those two types of people do.
right you dont have to explain it but i can still laugh at your for spending 15k too much to get a lesser car shoulda maybe done some research before buying since you could have gotten a ls3 car put some money into it and for 5-10k less had superior performing car that dosnt crack cylinders when you try to put even mediocre levels of power to it.
right you dont have to explain it but i can still laugh at your for spending 15k too much to get a lesser car shoulda maybe done some research before buying since you could have gotten a ls3 car put some money into it and for 5-10k less had superior performing car that dosnt crack cylinders when you try to put even mediocre levels of power to it.
#108
Registered User
iTrader: (4)
you have no real experience, no real knowledge, dont contribute anything at all and purposely try to drive off the people who DO by being a dumbass that is THE definition of a troll. this is why this community is the new hondas of the car world.
i had planned on actually contributing again and showing this group the **** i work on now and the **** i do which would blow most of their minds but **** it just a bunch of trolls and dreamers so ill stick to the bullet where people actually build and race cars.
i had planned on actually contributing again and showing this group the **** i work on now and the **** i do which would blow most of their minds but **** it just a bunch of trolls and dreamers so ill stick to the bullet where people actually build and race cars.
#110
Registered User
iTrader: (4)
and like i said your just a jealous troll, no your not building a car at all because you dont have the ability your one of those ***s who thinks a intake exhaust and wheels is a "build" yet insults actual builders and shop owners even though you dont have 1/10th the experience, knowledge and ability they do so you try to **** with them because your a jealous *****
#116
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I'll listen to Jerry here.
#117
New Member
iTrader: (18)
It is unfortunate that adults cannot remain polite and respectful even if they disagree. I suspect the mods allow it because it is difficult to police and there is a fine line between insult and humor. I think you've offered some good information for consideration jerry. I hope you can ignore the juvenile humor. Good luck on your big build!