UTEC Help - Tuning

camdenhuffman · 07-23-2008, 07:39 AM

I am new to the 350Z and looking for a lil help.

My current setup is:
06 M/T 350z
Nismo LSD
Nismo CAI
Nismo Cat Back
Motordyne 5/16 plenum spacer
Motordyne MREV 2 Manifold

Parts that I have to install yet:
Unorthodox Pullies
Unorthodox Lighten Flywheel
ZEX 82220 55-100 shot Kit
UTEC w/ remote map switch

I would like a base map for:
*My current setup
*My setup just including pullies and lighten flywheel
*My setup without pullies and LF and a 75 shot
*My setup without pullies and LF and a 100 shot

I read the manual for the Zex 82220 kit and it said to retard the timing by 2 for the 75 shot and another 2 for the 100 shot. Being new to tuning with the UTEC can someone send me a map showing what the timing cells should look like for the 75 shot and 100 shot.

Thanks!

camdenhuffman · 07-23-2008, 08:21 AM

also needed to mention I have Zex Window Switch and Zex Bottle Warmer just an FYI

camdenhuffman · 07-23-2008, 11:26 AM

anyone - anyone

rcdash · 07-23-2008, 12:51 PM

There are logs posted on this site by various users (search). You can also datalog in mode 0 to start and work from there...

gothchick · 07-23-2008, 08:03 PM

So it looks like you only have intake, plenum and catback? Do you even have a UTEC? At any rate, I kinda doubt anyone will spoon feed you their maps (mainly because every setup and tune is different, and also because you're an unknown n00b with only 8 posts), but if you (Search) you can get a good idea of what your tune should look like, based off the many logs posted here.... If you don't wanna take the time to learn how to tune, then your best bet will be to take it to a tuner.

07-23-2008, 07:39 AM	#1
camdenhuffman Registered User Join Date: Jan 2008 Location: WV Posts: 8 iTrader: (0)	UTEC Help - Tuning I am new to the 350Z and looking for a lil help. My current setup is: 06 M/T 350z Nismo LSD Nismo CAI Nismo Cat Back Motordyne 5/16 plenum spacer Motordyne MREV 2 Manifold Parts that I have to install yet: Unorthodox Pullies Unorthodox Lighten Flywheel ZEX 82220 55-100 shot Kit UTEC w/ remote map switch I would like a base map for: My current setup My setup just including pullies and lighten flywheel My setup without pullies and LF and a 75 shot My setup without pullies and LF and a 100 shot I read the manual for the Zex 82220 kit and it said to retard the timing by 2 for the 75 shot and another 2 for the 100 shot. Being new to tuning with the UTEC can someone send me a map showing what the timing cells should look like for the 75 shot and 100 shot. Thanks!

07-23-2008, 12:51 PM	#4
rcdash Master Join Date: Jul 2005 Location: Chapel Hill, NC Posts: 2,644 iTrader: (7)	There are logs posted on this site by various users (search). You can also datalog in mode 0 to start and work from there... __________________ ForgedPerformance Built: Arias, Eagle, JWT-700bb, GTM-5AT, Haltech, Carbonetics LSD, Tein Monoflex. Greddy evoTT, and StopTech BBK.

07-23-2008, 08:03 PM	#5
gothchick LivingDeadGirl Join Date: Feb 2007 Location: ATL Posts: 3,297 iTrader: (12)	So it looks like you only have intake, plenum and catback? Do you even have a UTEC? At any rate, I kinda doubt anyone will spoon feed you their maps (mainly because every setup and tune is different, and also because you're an unknown n00b with only 8 posts), but if you (Search) you can get a good idea of what your tune should look like, based off the many logs posted here.... If you don't wanna take the time to learn how to tune, then your best bet will be to take it to a tuner. __________________ 2006 6MT GT Silverstone, Nismo floormats - Coming soon: Nismo license plate frame Last edited by gothchick; 07-24-2008 at 07:32 AM.

07-23-2008, 08:21 AM	#2
camdenhuffman Registered User Join Date: Jan 2008 Location: WV Posts: 8 iTrader: (0)	also needed to mention I have Zex Window Switch and Zex Bottle Warmer just an FYI

07-23-2008, 11:26 AM	#3
camdenhuffman Registered User Join Date: Jan 2008 Location: WV Posts: 8 iTrader: (0)	anyone - anyone