Haltech Questions

JuJube · 08-27-2008, 04:09 PM

Hey there 350z Community.

Just wondering if anyone has info on wiring in Widebands and the Air Temp Sensor into the Haltech.

I have removed the Maf Sensor and Plan to remove the factory O2 Sensors and use my Widebands.

So any info on wiring the the Air Temp Sensor, 2 X Wideband Sensors, and some mroe detailed info on a Boost Solenoid would be greatly appreciated.

I have a e-mail into Hal, but he is a busy guy. :-)

Thanks again.

__jb · 08-28-2008, 11:38 AM

I remember Hal giving pinouts in the main Haltech thread. I don't remember if it's everything you're looking for, but I'd start here.

Injected Performance brings you HALTECH PLATINUM PNP STANDALONE

MDK · 08-28-2008, 12:52 PM

The widebands need to be spliced into the Haltech harness for sure, its pretty simple. Hal should be able to help you with this, I'm not sure if he wants it posted on the forums, so I won't.

The other two, if I remember right, can be plugged into one of the extra connectors.

rcdash · 08-29-2008, 08:00 AM

Everything you need should be in the handy dandy attachment.

JuJube · 08-29-2008, 08:03 AM

Well I found the location to splice in the air intake sensor in the factory harness.

I also found all the proper info for the Boost Controller Solenoid.

But still need info on the widebands.

I talked to Hal on the Phone yesterday and he said he would forward me the info.

Thanks for the help guys.

rcdash · 08-29-2008, 08:07 AM

Look at the attachment. I should have probably clarified that the data is basically all provided by Hal. I just gathered the info from various posts and e-mails and put it into one document.

JuJube · 08-30-2008, 10:35 AM

Thanks rcdash.

Much appreciated.

08-27-2008, 04:09 PM	#1
JuJube Registered User Join Date: May 2006 Location: Edmonton, Alberta Canada Posts: 116 iTrader: (2)	Haltech Questions Hey there 350z Community. Just wondering if anyone has info on wiring in Widebands and the Air Temp Sensor into the Haltech. I have removed the Maf Sensor and Plan to remove the factory O2 Sensors and use my Widebands. So any info on wiring the the Air Temp Sensor, 2 X Wideband Sensors, and some mroe detailed info on a Boost Solenoid would be greatly appreciated. I have a e-mail into Hal, but he is a busy guy. :-) Thanks again. __________________ Travis - 2004 350z Enthusiast - Greddy Twin Turbo, 400HP RWHP, Haltech, Lots of Fun.

08-28-2008, 11:38 AM	#2
__jb Z + Rear Seat Join Date: Jun 2005 Location: St.Pete,FL Posts: 1,278 iTrader: (2)	I remember Hal giving pinouts in the main Haltech thread. I don't remember if it's everything you're looking for, but I'd start here. Injected Performance brings you HALTECH PLATINUM PNP STANDALONE __________________ Florida G Club, President 2k5 LR G35 Coupe 6MT CrawfordZ Plenum, Headers, HFC \| HKS TI \| Carbonetics LSD \| 4.083 FD Haltech \| Osiris \| JE, Eagle, JWT Cams \| Performance Factory VQ35DE 312 rwhp

08-29-2008, 08:03 AM	#5
JuJube Registered User Join Date: May 2006 Location: Edmonton, Alberta Canada Posts: 116 iTrader: (2)	Well I found the location to splice in the air intake sensor in the factory harness. I also found all the proper info for the Boost Controller Solenoid. But still need info on the widebands. I talked to Hal on the Phone yesterday and he said he would forward me the info. Thanks for the help guys. __________________ Travis - 2004 350z Enthusiast - Greddy Twin Turbo, 400HP RWHP, Haltech, Lots of Fun.

08-29-2008, 08:07 AM	#6
rcdash Master Join Date: Jul 2005 Location: Chapel Hill, NC Posts: 2,649 iTrader: (7)	Look at the attachment. I should have probably clarified that the data is basically all provided by Hal. I just gathered the info from various posts and e-mails and put it into one document. __________________ ForgedPerformance Built: Arias, Eagle, JWT-700bb, GTM-5AT, Haltech, Carbonetics LSD, Tein Monoflex. Greddy evoTT, and StopTech BBK. Last edited by rcdash; 08-29-2008 at 08:09 AM.

08-30-2008, 10:35 AM	#7
JuJube Registered User Join Date: May 2006 Location: Edmonton, Alberta Canada Posts: 116 iTrader: (2)	Thanks rcdash. Much appreciated. __________________ Travis - 2004 350z Enthusiast - Greddy Twin Turbo, 400HP RWHP, Haltech, Lots of Fun.

08-28-2008, 12:52 PM	#3
MDK Registered User Join Date: Aug 2007 Location: Milwaukee Posts: 93 iTrader: (2)	The widebands need to be spliced into the Haltech harness for sure, its pretty simple. Hal should be able to help you with this, I'm not sure if he wants it posted on the forums, so I won't. The other two, if I remember right, can be plugged into one of the extra connectors.