FS: Greddy 18g tt kit
#1
Registered User
Thread Starter
Join Date: Oct 2013
Location: Ft Myers
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Greddy 18g tt kit
I bought the kit with the car on it, and the kit had maybe 10k miles on it since it had been built. The turbos are in perfect condition, no shaft play at all. The shop that took them off said it looks like the kit was barely run. The only things wrong with the kit is it was in a minor front end collision and one of the pipes were bent so a new one has been made. The pipe is a a crush bend so it may not be the prettiest but it works perfectly! and in the collision the intercooler took a little beating and bent some fins but works just fine. Also the passenger side manifold is cracked. You can either have it welded or get a new one from Greddy for 300. Nur Performance has a guy that can do the weld professionally and it will not break again. Ill leave it up to the buyer for that decision. The kit comes with 440cc injectors and the bov is a hks ssqv. The ecu from my car will be included its off an 03. The tune was done by S&R performance in tampa fl. It was done with the Osiris Uprev and the boost was set at 9psi at a little over 400hp.
Price is 3800 obo
Any questions just pm me
Feel free to ask anything!
Shipping and paypal fees are too be paid by buyer
Price is 3800 obo
Any questions just pm me
Feel free to ask anything!
Shipping and paypal fees are too be paid by buyer
#4
Registered User
Join Date: Feb 2012
Location: Bloomington, CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I just sold the same kit with a cracked manifold on this forum. Just wanted to let op know that greddy no longer sells individual manifolds. They stopped and claim to never have done it before so my suggestion is to get it welded.
#5
Registered User
Thread Starter
Join Date: Oct 2013
Location: Ft Myers
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Damn yea I saw your kit that where i got the 300 from haha. But ill try to get a quote from the welder soon!
Trending Topics
#8
Registered User
Join Date: Mar 2013
Location: casselberry
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
i had the passanger side manifold crack on me too... i took it to a buddy of mine that does welding for a living and it just ate right through it... be real careful if you try to weld it... i ended up buying a new set of manifolds... i also entertained the idea of getting stainless steel ones fabricated but the price tag made up my mind... it was around 1200-1500 for the set... figured i'd put my 2 cents in...
Thread
Thread Starter
Forum
Replies
Last Post