VQ35HR aftermarket cams???

fwdracer1838 · 02-13-2008, 07:08 PM

Anybody out there making them yet? I'm interested in picking some up in the future. What kind of horsepower are the DE guys picking up with cams.

toples z · 02-13-2008, 09:34 PM

cams would be a horable first mod. Worst bang for your buck

itsjiggajames · 02-13-2008, 10:59 PM

Quote:

Originally Posted by toples z

cams would be a horable first mod. Worst bang for your buck

and you know this because your car has the HR cams that have been out for a minute huh?

Skorch · 02-14-2008, 01:07 AM

Quote:

Originally Posted by toples z

cams would be a horable first mod. Worst bang for your buck

In most cars cams actually produce some very nice gains. Would I make cams my first mod though? Not really.

shadykilla717 · 02-14-2008, 04:10 AM

Cams should NEVER be the first mod. But I would Love to see what cams can do for us.. They did amazing gain's On my '02 civic si.... Those K-Motors loved getting camed.

fwdracer1838 · 02-14-2008, 04:12 AM

where the hell in my post did i say they were my first mod? Either way I'm just asking to see if anyone knew if someone had started making them, because i couldn't find any.

shadykilla717 · 02-14-2008, 04:20 AM

Quote:

Originally Posted by fwdracer1838

where the hell in my post did i say they were my first mod? Either way I'm just asking to see if anyone knew if someone had started making them, because i couldn't find any.

I was commenting on the person above me lol Not you lol.

But no. I don't think there being made yet.. Give it a good year or so.... I would like to guess then. Considering there really arn't any internals. Not even headers yet..

BlackTuner · 02-14-2008, 05:20 AM

I know that JWT has HR cams in development. I will have a set on the way soon!

PM-Performance · 02-14-2008, 09:26 AM

Does anyone know much about the HR cam profiles to even be worrying about cam upgrades yet?

I think you are a bit ahead of yourself

fwdracer1838 · 02-14-2008, 09:33 AM

Quote:

Originally Posted by PM-Performance

Does anyone know much about the HR cam profiles to even be worrying about cam upgrades yet?

I think you are a bit ahead of yourself

O RLY? I have yet to see a car hasn't benefited from cams.

T_K · 02-14-2008, 10:34 AM

Quote:

Originally Posted by PM-Performance

Does anyone know much about the HR cam profiles to even be worrying about cam upgrades yet?

I think you are a bit ahead of yourself

Same as Rev-up, except with 2 degrees of overlap instead of -4 degrees. I'll post up the numbers once I dig it up.

TK

T_K · 02-14-2008, 10:45 AM

Rev Up VQ35DE:

Lift:
Intake/Exhaust : 10.5mm/10.5mm

Duration:
Intake/Exhaust: 248/248

Intake Open: 2º ATDC
Intake Close: 70º ABDC

Exhaust Open: 70º BBDC
Exhaust Close: 2º BTDC

Overlap: -4º

VQ35HR:

Lift:
Intake/Exhaust : 10.5mm/10.5mm

Duration:
Intake/Exhaust: 248/248

Intake Open: 2º BTDC
Intake Close: 66º ABDC

Exhaust Open: 68º BBDC
Exhaust Close: 0º BTDC

Overlap: 2º

TK

g356gear · 02-14-2008, 12:03 PM

GTM has cams available for the HR. PM George or Sam.

capnstabn · 02-14-2008, 02:07 PM

Quote:

Originally Posted by g356gear

GTM has cams available for the HR. PM George or Sam.

They Dyno their Cams after install?

g356gear · 02-14-2008, 07:50 PM

Quote:

Originally Posted by capnstabn

They Dyno their Cams after install?

No idea. You can find them in this thread.

http://my350z.com/forum/showthread.p...35hr+camshafts

Z1 Performance · 02-19-2008, 06:08 PM

we've got some coming soon too....will post when we are ready for a test car

vnarang · 02-19-2008, 09:23 PM

in before bboy

midz350 · 09-20-2010, 10:49 AM

I know this is an old thread, but didn't want to start a new one.

Trust GReddy Easy Cams Kouki VQ35HR Z33:

Quote:

Description
This is a set of Trust GReddy Easy Camshafts for the Nissan Fairlady Z Z33(Kouki) with a VQ35HR engine. This set comes with 4 camshafts, two Intake Camshaft and two Exhaust Camshaft.

This is what Trust Greddy has to say about the cams:
Trust GReddy Easy Camshaft Sets are designed to improve the torque and power characteristic of your engine, without changing the valve timing or need to change other valvetrain components. By keeping things simple with a matched set of intake and exhaust camshafts, installation is straightforward and users can easily experience and enjoy their improvements of a wider usable power band without the loss of drivability or idle.

Please consult with us before purchasing on what options if any you may have in choosing the type of kit. We will need to know your exact vehicle information.

Product Specs
Brand : Trust GReddy
Product : Camshaft set
Model : Easy
Type : Solid
Part Num. : 13526207 Intake:264deg/11.0mm/122deg Exhaust:267deg/11.0mm/124deg (Z33)

http://www.rhdjapan.com/trust-greddy...35hr-z33-56330