Aggressive Wheels and Stretched Tires....Welcome
Registered User
iTrader: (9)
Join Date: Feb 2006
Location: New Orleans
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
i can take more what you want to see? close up of the fitment, front, and rear?
appreciate the love
no im not bach but funny thing is i do know him. his nsx is actually blue now and he never owned a 350z, it was a twin turbo or single (i forgot) g35. appreciate the love though
appreciate the love
no im not bach but funny thing is i do know him. his nsx is actually blue now and he never owned a 350z, it was a twin turbo or single (i forgot) g35. appreciate the love though
Registered User
iTrader: (1)
Join Date: Feb 2014
Location: Tampa
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Any advice on tires? Specs are 19 x 10.5 and 11.5 +6 all around. I've been on tyrestretch.com and I'm thinking 235/35 for the fronts and 245 or 55 /35 for the rears. Not too sure though. Can't tell the camber bc my tool only goes up to 3 degrees. The clearance (top of the wheel to bottom of the fender) is 49.3 mm +/- 5mm on all sides.
Pics: http://m.imgur.com/a/c0yEF
Pics: http://m.imgur.com/a/c0yEF
Last edited by Broseph Stalin; 12-19-2014 at 03:26 PM.
New Member
Help!
Hey guys I'm looking into the new varrstoen es8
F - 18x9.5 +22
R - 18x10.5 +15
Not sure the tire size I should go with to end with stretched tires!?
F - 18x9.5 +22
R - 18x10.5 +15
Not sure the tire size I should go with to end with stretched tires!?
Hardest Setting
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
I can help...please continue to read backwards through this thread from this page. Two to three pages back and you should start to get a feel for what is what. Keep us posted on your choice and also post up some pics as we'd like to see what size spacers you're gonna put on this car to make use of this stretch look wise.
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Go with 18x10.5 +15 all around , get 15mm spacers for the rear and run 255/40-18 all around. Drop and adjust camber to fit. It will look better than 99% of the car in this thread.
New Member
Yeah if I could drop 3-4k on a set of wheels I would too bad the marine corps don't pay you that much! So I gotta stick with a budget! I would love to go with a x11 front width and x12 rear but I'm really picky when it comes to wheels and thanks for the suggestions guys
Hardest Setting
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Yeah if I could drop 3-4k on a set of wheels I would too bad the marine corps don't pay you that much! So I gotta stick with a budget! I would love to go with a x11 front width and x12 rear but I'm really picky when it comes to wheels and thanks for the suggestions guys
Enjoy modding..don't rush it, it leaves a bad taste if you do!
New Member
Lol I know I know I love my Z I gotta do it right! And for now those es8 will do the job can't wait to get them and put them on!
Master
iTrader: (8)
Banned
iTrader: (25)
Yeah if I could drop 3-4k on a set of wheels I would too bad the marine corps don't pay you that much! So I gotta stick with a budget! I would love to go with a x11 front width and x12 rear but I'm really picky when it comes to wheels and thanks for the suggestions guys
do it once, do it right.
Master
iTrader: (8)
Registered User
Join Date: Dec 2014
Location: chandler arizona
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
anyone run 19x11.5 with 265/30/19 ??? i have nankang ns20 noble sport on my 19x11.5 .. one side it hole air perfectly .. 2% of barrel expose.. but the other side..it leaking on the bead... tried to use bead sealer still wouldnt help... anyone ? nankang ns20 run small..which i like.. but i dont know about any other tires..