When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Whats up guys recently bought a g35 black 05 6mt. I have a set of wheels that came off of a previous car, a stanced 2004 rx8. Getting ready to start my project and wanted to see if the wheels that I had would fit without any modifications. I know i can get them to fit the g35, if i got them on the rx8... question is what is it going to take? The wheels are weds bazerias 19x10.5 offsets +16/27 .. For tires i have a few to choose from .. i have a full set of 255/30's... i also have a pair of 245/40's and a pair of 275/40's.. i currently have stock suspention .. havent decided on bags or coils yet .. any input would be much appreciated thank you ive included pictures of the wheels and the cars .. looking forward to your input ...
This is my previous car
the weds
Last edited by illestcarmedia; 07-23-2015 at 10:42 PM.
Just for reference, illest, those are almost the specs of what I'm rocking now (the white g a page back). so, for stancy pants hellaflushness, you'll need some spacer meats. I'm coming from foot wide wheels tho. So, that's why my fenders have been pulled a bit.
Remember when people in here had actual ***** and were all sitting on coilovers?
Btw, if you're gonna be a hardparker at least get camber to match all around...
I used to have a completely static build that was about an inch from the ground. Got tired of breaking stuff.
I'm working on adding more camber in front but can't due to the fact that the UCA hits the bag. Once I get that figured out, it'll be damn close.
Couple iPhone shots and my buddies shot! 18x10 up front 18x12 in the rear
I can understand some people digging the slammed look, but that rear tire just doesn't even look safe......I cannot comprehend why someone would wanna do this to their z, but as prev stated, to each their own....
I can understand some people digging the slammed look, but that rear tire just doesn't even look safe......I cannot comprehend why someone would wanna do this to their z, but as prev stated, to each their own....
All good, I respect it. kinda.
I mean it's a look to get attn, and you don't see serious builders like BMcCann pulling that.
All good, I respect it. kinda.
I mean it's a look to get attn, and you don't see serious builders like BMcCann pulling that.
Well, of course not, serious builders know compromising drivability is never an option.....still, I have no problems with low, I have a g35 project that I plan on slamming for show, it's that ridiculous camber.....
That said and despite my not understanding form over function, mad respect to these guys (and anyone going full tilt in whatever endeavor) for takin' it to the limit of their thang.
But... every time I see something so cambered, my mind is telling me, "Oh my, something's broken on that gentleman's car. Ethel, maybe we should call Triple-A for him?"
07-23-2015, 10:35 PM
ive included pictures of the wheels and the cars .. looking forward to your input ... 
