Unofficial Enkei Wheels Thread
#2221
New Member
iTrader: (14)
Guys, I just purchased RPF1's in SBC 18x9.5 +15 up front and 18x10.5 +15 out back. 255/40 and 275/40 Hankooks. I see a bunch of you guys running the Akebono BBK's with similar setup. I have heard someone say that with this combo, it scrapes the inner wheel barrel do to the size of the caliper. Anyone running the Akebono BBK, please comment on this. I am on the fence about to order the 14" Akebono up front and having a tough time deciding whether or not to, or go with a 13" or 14" wilwood superlight BBK up front. Any input would be appreciated.
#2222
Registered User
iTrader: (3)
Guys, I just purchased RPF1's in SBC 18x9.5 +15 up front and 18x10.5 +15 out back. 255/40 and 275/40 Hankooks. I see a bunch of you guys running the Akebono BBK's with similar setup. I have heard someone say that with this combo, it scrapes the inner wheel barrel do to the size of the caliper. Anyone running the Akebono BBK, please comment on this. I am on the fence about to order the 14" Akebono up front and having a tough time deciding whether or not to, or go with a 13" or 14" wilwood superlight BBK up front. Any input would be appreciated.
#2230
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
You will need a 5mm front spacer and none for the rear, but I recommend a 10mm front and 15 to 20mm rear.
#2233
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I currently still run a 20mm spacer with them on 285's in the rear. 10mm up front with 285/35, but I am running a race alignment,
#2236
New Member
iTrader: (8)
Gotcha! I'm having a hard time deciding on tires. The only reason I chose to run 275/35/18 and 275/40/18 is because they match the same height as stock. I haven't bought tires yet, so I can still look around. I have 10mm project kics spacers in the front and I picked up 15mm b2autodesign spacers in the rear. just waiting on my Blue Rays valve stems to arrive and decide on tires.
#2240
Registered User
Does anyone have the actual physical "dimensions" from lip to lip on the RPF1's, not bead to bead. Is it 1" on diameter and width? or are they different?
Made a template to decide on offset, just double checking my measurements.
Looking at the 18x9.5 +15 and the 18x10.5 +15.
Made a template to decide on offset, just double checking my measurements.
Looking at the 18x9.5 +15 and the 18x10.5 +15.