<<< The Official Weds Army Thread >>>
#123
350z wheels what type brembo calipers???
Hi I need help
I want to put into my 350z rims Kranze Bazreia 19" front wheel with a outer rim 105mm and 130mm on the rear axle. I do not know what width should I look for and what type of disk(s-low,low,mid,hi) offset + or - to the brembo calipers.
I come from Poland. Here goes few cars that have the wheel. Please, any advice and sorry for my bad English
I want to put into my 350z rims Kranze Bazreia 19" front wheel with a outer rim 105mm and 130mm on the rear axle. I do not know what width should I look for and what type of disk(s-low,low,mid,hi) offset + or - to the brembo calipers.
I come from Poland. Here goes few cars that have the wheel. Please, any advice and sorry for my bad English
#124
New Member
iTrader: (4)
Join Date: Jan 2010
Location: Akron, OH
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
I'm sorry...are you talking about the distance from the mounting point to the outer edge of the rim when you say 105mm & 130mm?
I am under the impression that the bbk's out there are rather set...perhaps you want to know which is the largest bbk that will fit with those rims?
I think someone here will be able to answer your question without any further information, but is there any way you could clarify your question? I'm only trying to help clarify this so perhaps others could answer.
I am under the impression that the bbk's out there are rather set...perhaps you want to know which is the largest bbk that will fit with those rims?
I think someone here will be able to answer your question without any further information, but is there any way you could clarify your question? I'm only trying to help clarify this so perhaps others could answer.
#125
Sorry, the trouble is that I do have a factory fited brembo's on my car and I want to buy thoess wheel - Kranze, model Bazreia.
Now the problem is that i don't know wich DISK TYPE and ET I should choose to fit the car without the problem with hiting callipers. 105 and 130mm is the dish depth and diameter is 19".
http://kranze.jp/english/bazreia.html (link to the rims)
To make it clearer i will atatch a link to the car with thoes wheels fited but his callipers are stock non brembo's so can't use his rims specs...
http://fatlace.com/cars/hellaflush/d...50-from-texas/
Now the problem is that i don't know wich DISK TYPE and ET I should choose to fit the car without the problem with hiting callipers. 105 and 130mm is the dish depth and diameter is 19".
http://kranze.jp/english/bazreia.html (link to the rims)
To make it clearer i will atatch a link to the car with thoes wheels fited but his callipers are stock non brembo's so can't use his rims specs...
http://fatlace.com/cars/hellaflush/d...50-from-texas/
#127
Registered User
iTrader: (4)
Just stepped up to my first pair of legit wheels, SA-60M's. 18x10 +20, Cannot WAIT to put these on the car!!
Definitely going to post up pictures once they're on the car, especially considering with all of my searching I was only able to find one picture of them on a Z, and it was a stock ride height Z... Photos cannot do the color of these wheels justice. :bow: to Weds.
Got them on yesterday. Only got to take instagram pics because when I finally got them on it was getting dark. These wheels are super super rad.
Better pictures later on. 18x10 +20 all around with 15mm spacer in the rear, 20mm or 25mm spacer up front, can't remember
Definitely going to post up pictures once they're on the car, especially considering with all of my searching I was only able to find one picture of them on a Z, and it was a stock ride height Z... Photos cannot do the color of these wheels justice. :bow: to Weds.
Got them on yesterday. Only got to take instagram pics because when I finally got them on it was getting dark. These wheels are super super rad.
Better pictures later on. 18x10 +20 all around with 15mm spacer in the rear, 20mm or 25mm spacer up front, can't remember
Last edited by Deedilus; 06-15-2012 at 08:37 AM. Reason: Pics of them on the car.
#136
Registered User
Join Date: Feb 2012
Location: Bay Area, CA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have any recommendations of a place to purchase Weds Kranze center caps?
Oh, and this is a report from the other thread, but at least it's still a contribution to the thread haha. This is my car on Weds Kranze LXZ. 18x10.5 -4 18x11.5 -16~~(could be more, still unsure lol)
Oh, and this is a report from the other thread, but at least it's still a contribution to the thread haha. This is my car on Weds Kranze LXZ. 18x10.5 -4 18x11.5 -16~~(could be more, still unsure lol)
Last edited by albertsZ; 03-05-2014 at 09:59 AM.
#138
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM