WORK Wheels Largest Authorized East Coast Distributer
09-08-2010, 04:23 PM
#201
WORK VSXX 3 Piece Wheel - Special Edition 19" Step Lip
Brombacher Series For 5x114.3 and 5x112 Vehicle
2nd Around of 10 sets available now ! ETA: December, 2010
1st round of 10 sets sold within 4 weeks !!! Don't miss out this time
Brombacher Series For 5x114.3 and 5x112 Vehicle
2nd Around of 10 sets available now ! ETA: December, 2010
1st round of 10 sets sold within 4 weeks !!! Don't miss out this time
Over the years, many have asked if Brombacher with step-lip was available for other vehicles beside Porsche, the answers has always been no.
WORK Wheels USA decide to make the investment and have WORK Japan produce a special edition Brombacher in 19” step-lip. The available bolt pattern is available in 5-114.3 and 5-112 PCD to target other vehicle platforms. This special edition Brombacher have a different center cap and center bore size compare to the Brombacher Porsche version. The 5-114.3 PCD will have a center bore size of 73.3mm and the 5-112 PCD will have BMW bore size.
WORK Wheels USA decide to make the investment and have WORK Japan produce a special edition Brombacher in 19” step-lip. The available bolt pattern is available in 5-114.3 and 5-112 PCD to target other vehicle platforms. This special edition Brombacher have a different center cap and center bore size compare to the Brombacher Porsche version. The 5-114.3 PCD will have a center bore size of 73.3mm and the 5-112 PCD will have BMW bore size.
Some spec for reference ** Non Brembo Fitment Guide **:
Standard Fitment: 19x9.5 +19mm Front (85mm lip) / 19x11.0 +25mm Rear (98mm lip)
Semi Aggressive Fitment: 19x9.5 +2mm Front (98mm lip) / 19x11.0 +12mm Rear (110mm lip)
Super Aggressive Fitment: 19x10.0 -4mm front (110mm lip) / 19x11.0 +8mm Rear (110mm lip)
*** Price Start Around $3500.00 please PM us for additional spec / Brembo Caliper options / Tire pacakge ***
09-15-2010, 07:00 PM
#202
WORK Varianza and Schwert Series *** Promotion End 11/30/2010
Free Custom Color! $160.00 Value!!
Customer can choose other colors aside from assigned standard colors at no additional charge. i.e. – If customer wants to paint the wheel face color like VS-XX gold (XG) or Burning Black (BKB), there will be no additional $40.00 per wheel charge. Color exclude: NXC, WBC, WBD, WMB, BKM, BBF, Chrome.
Free Custom Color! $160.00 Value!!
Customer can choose other colors aside from assigned standard colors at no additional charge. i.e. – If customer wants to paint the wheel face color like VS-XX gold (XG) or Burning Black (BKB), there will be no additional $40.00 per wheel charge. Color exclude: NXC, WBC, WBD, WMB, BKM, BBF, Chrome.
11-03-2010, 12:39 PM
#211
WORK Wheels - Maintenance and Storage Conditions
Here are some of our recommended tips regarding wheel care.
* Aluminum alloy wheels are susceptible to corrosion when they are expose to salt or mud. Therefore, wash them with water after driving the vehicle on the beach or on a snowy or unpaved road. The use of soft-cloth is suitable when wiping the wheel.
* Do not use chemicals that include abrasive compounds, strong acids or high alkaline content. To select the right cleaning products, please read their product labels and instruction carefully.
* Using car wash equipment could potentially scratch the wheels. It is the best way to wash by hand. When doing so, be careful with sharp edges, which could be hazardous to your hands.
* When storing these wheels/tires for a extended period of time, protect them from direct sunlight, rain, oil, moisture, humidity and high temperature.
* When storing a tire that is mounted on a wheel, you should only keep 1/2 of the air pressure. When re-installation, always check the tire pressure to the recommended level by the tire manufacture.
* Whenever possible please limit or refrain usage of tire shine products, as we have noticed a correlation between the oxidation of wheel lip surfaces and these products.
As shown in the image above, here are some recommended tips for proper cleaning of our wheels:
Step 1) First, rinse the wheel lightly with water to remove debris and brake dust.
Step 2) Second, use a microfiber or soft towel while using generous amounts of water to clean the surface of the wheel.
Step 3) Third, once the surface is clean, use a microfiber or soft towel to dry the wheel to avoid water spotting. Be careful that you have completely cleaned the surface, otherwise debris could scratch the surface during the drying process.
Step 4) Lastly, if you maintain this washing process on a normal and consistent basis, your wheels will keep its clean appearance.
* Aluminum alloy wheels are susceptible to corrosion when they are expose to salt or mud. Therefore, wash them with water after driving the vehicle on the beach or on a snowy or unpaved road. The use of soft-cloth is suitable when wiping the wheel.
* Do not use chemicals that include abrasive compounds, strong acids or high alkaline content. To select the right cleaning products, please read their product labels and instruction carefully.
* Using car wash equipment could potentially scratch the wheels. It is the best way to wash by hand. When doing so, be careful with sharp edges, which could be hazardous to your hands.
* When storing these wheels/tires for a extended period of time, protect them from direct sunlight, rain, oil, moisture, humidity and high temperature.
* When storing a tire that is mounted on a wheel, you should only keep 1/2 of the air pressure. When re-installation, always check the tire pressure to the recommended level by the tire manufacture.
* Whenever possible please limit or refrain usage of tire shine products, as we have noticed a correlation between the oxidation of wheel lip surfaces and these products.
As shown in the image above, here are some recommended tips for proper cleaning of our wheels:
Step 1) First, rinse the wheel lightly with water to remove debris and brake dust.
Step 2) Second, use a microfiber or soft towel while using generous amounts of water to clean the surface of the wheel.
Step 3) Third, once the surface is clean, use a microfiber or soft towel to dry the wheel to avoid water spotting. Be careful that you have completely cleaned the surface, otherwise debris could scratch the surface during the drying process.
Step 4) Lastly, if you maintain this washing process on a normal and consistent basis, your wheels will keep its clean appearance.
