FAQ: Official wheel "SPACER" thread!
#1235
i have work meisters s1's
19x9.5 +12 245/35
19x10.5 +10 275/35
i want the fronts to poke out more. just not sure if the bolts will protrude when i put a spacer on. was thinking to ad a 10 or 15 mm spacer.
also i would like to add a 10mm to the rear to get to 0 offset.
am i going to run into any problems. im low and not afraid to run some more camber. and yes my tires are beefy lol
19x9.5 +12 245/35
19x10.5 +10 275/35
i want the fronts to poke out more. just not sure if the bolts will protrude when i put a spacer on. was thinking to ad a 10 or 15 mm spacer.
also i would like to add a 10mm to the rear to get to 0 offset.
am i going to run into any problems. im low and not afraid to run some more camber. and yes my tires are beefy lol
#1236
Registered User
Join Date: Apr 2014
Location: Clarksville Tn
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
This is mine with OEM wheels Tanabe gf210s and 25mm all around I also have like 14mm on each rear side added by a the dual caliper setup. I know for my Z I would rather have run 30mm up front. Just my 2 cents for folks spacing OEM wheels. I am running stance rear camber arms with lockouts and SPC toe bolts as well.
#1237
Registered User
Join Date: Dec 2014
Location: miami, fl
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I have varrstoen es6 19x9.5 all around with i believe +22 offset and was wondering what kind of spacers should i run. I was thinking about 25mm in the rear and 20mm in the front but was worried about protrusion. Just wanted to get an input from you guys since you seem to be experienced with spacers and this is my first time using them.
#1238
Registered User
Join Date: Dec 2014
Location: miami, fl
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Which spacers should i get??!?!? help
I know there are other posts about this but i just want some help on what size spacers i should run on my Z. I have Varrstoens ES6 19x9.5 all around with +22 offset all around I believe. At first i was thinking about 25mm in front and 30mm rear but now I'm thinking about 20mm in front and 25mm in rear. i'm also running 245/40 tires in the front and 255/40 tires in the rear. i'm worried that the front will have protrusion and was wondering if i'd need to buy extended studs.
#1240
Registered User
Join Date: Dec 2014
Location: miami, fl
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
i read on one of the threads about spacers that you didn't need extended lug nuts unless you bought spacers 25mm or higher because the OEM Z studs are about 24mm so a 25mm spacer would cover them? this is so confusing. so you recommend extended studs all around ?