2006 350z Front Will Fit On the Rear??
03-24-2010, 10:38 PM
#1
Registered User
Thread Starter
Join Date: Oct 2009
Location: Australia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
2006 350z Front Will Fit On the Rear??
Hi, i stuffd up my rear rim, guttered it pretty bad. so im plannin on getting one from the wreckers. they have a FRONT 2006 350z Rim thats in great nick.
Would i be able to put it on the rear??
I know its SLIGHTLY smaller, but can you really notice?
And most importantly. WILL IT FIT:?
TA
Would i be able to put it on the rear??
I know its SLIGHTLY smaller, but can you really notice?
And most importantly. WILL IT FIT:?
TA
03-25-2010, 04:16 AM
#4
Cleaned up thread.. Geez guys - simple answer would have worked.
OP IIRC - the 06 have 18x8.5 rears and 8.0 fronts. you CAN put the front on the rear but I hope its just temporary and not permanent cause it WONT look right.. Tire size depends as well..I think you can go 235 or more on a 8 inch rim
OP IIRC - the 06 have 18x8.5 rears and 8.0 fronts. you CAN put the front on the rear but I hope its just temporary and not permanent cause it WONT look right.. Tire size depends as well..I think you can go 235 or more on a 8 inch rim
03-25-2010, 07:02 AM
#5
You can make it "look" right with a spacer. The rears are 18x8.5 +33 and the fronts are 18x8 +30 (or maybe I have the offsets reversed - look on the back of the wheel). If I'm right on the offsets, putting the front 18x8 on the back would require a 3mm shim spacer to have the face of the wheel sit at the same spot as the 18x8.5. It's not ideal, but I bet no one would notice.
03-25-2010, 08:17 AM
#6
Use a offset calculator to compare your current wheels to the new wheels. With the new dimensions, check the car with a tape. Do you clear the suspension, brakes calipers and fenders? Reference: http://www.1010tires.com/WheelOffsetCalculator.asp
Thread
Thread Starter
Forum
Replies
Last Post
