Official Widebody/Fender Flare Wheel & Tire Thread
#1
Registered User
Thread Starter
Official Widebody/Fender Flare Wheel & Tire Thread
Alright, there are getting to be way more of us around here lately. Time to start a thread to share our specs and pics. Please follow the format below.
Front Flares: Stardast (trimmed and widened ~3/4")
Front Wheel: 19x11.5 -22 offset
Front Tire: 295/30/19
Front Camber: -1.8 degrees at ride height (unknown aired out)
Front Camber Arms: Stock
Rear Flares: Stardast (trimmed quite a bit)
Rear Wheel: 19x11.5 -40 offset
Rear Tire: 305/30/19
Rear Camber: -2.5 degrees at ride height (unknown aired out)
Rear Camber Mods: SPC Cam Bolts for camber and toe
At ride height:
Aired out:
Front Flares: Stardast (trimmed and widened ~3/4")
Front Wheel: 19x11.5 -22 offset
Front Tire: 295/30/19
Front Camber: -1.8 degrees at ride height (unknown aired out)
Front Camber Arms: Stock
Rear Flares: Stardast (trimmed quite a bit)
Rear Wheel: 19x11.5 -40 offset
Rear Tire: 305/30/19
Rear Camber: -2.5 degrees at ride height (unknown aired out)
Rear Camber Mods: SPC Cam Bolts for camber and toe
At ride height:
Aired out:
The following users liked this post:
superlim9 (11-04-2015)
#3
350Z-holic
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,213
Received 399 Likes
on
227 Posts
Front Flares: Stardast
Front Wheel: 19x11 -6.25 offset
Front Tire: 295/30/19
Front Camber: unknown aired out
Front Camber Arms: Megan with prothane poly bushings
Rear Flares: Stardast
Rear Wheel: 19x11 -44 offset
Rear Tire: 295/30/19
Rear Camber: -3.5 degrees at ride height (unknown aired out)
Rear Camber Mods: SPC Cam Bolts for camber and toe
Front Wheel: 19x11 -6.25 offset
Front Tire: 295/30/19
Front Camber: unknown aired out
Front Camber Arms: Megan with prothane poly bushings
Rear Flares: Stardast
Rear Wheel: 19x11 -44 offset
Rear Tire: 295/30/19
Rear Camber: -3.5 degrees at ride height (unknown aired out)
Rear Camber Mods: SPC Cam Bolts for camber and toe
The following users liked this post:
1BaddLSZ (01-04-2021)
#5
Registered User
iTrader: (2)
I have an over fender on my rear end but it's like 15mm. Fitment is suprisingly good, but my car isn't even close to running. I don't see any point in posting about it.
I have been thinking about widening the car on top of that though, with some over over fenders front and rear, but I don't want to buy new wheels for a car I don't have running yet.
Throwing around some ideas in my head almost daily, but there are other things I want to do with my money than invest in body panels and wheels. Camera, trips, nitrous, brakes, tune, school... meh.
Maybe when I get the car running I'll see how it looks and work from there and have something to contribute but you guys are the only widebody guys.
Everyone else that might be on here are running the veilside fugly duck kit. I had a mastergrade widebody replica which is what got me to cut my rear up in the first place, but that kit is very old school widebody. Think there might be a member on here somewhere, with that kit.
I have been thinking about widening the car on top of that though, with some over over fenders front and rear, but I don't want to buy new wheels for a car I don't have running yet.
Throwing around some ideas in my head almost daily, but there are other things I want to do with my money than invest in body panels and wheels. Camera, trips, nitrous, brakes, tune, school... meh.
Maybe when I get the car running I'll see how it looks and work from there and have something to contribute but you guys are the only widebody guys.
Everyone else that might be on here are running the veilside fugly duck kit. I had a mastergrade widebody replica which is what got me to cut my rear up in the first place, but that kit is very old school widebody. Think there might be a member on here somewhere, with that kit.
#7
Registered User
Thread Starter
Yeah, that's right! Alex Stinvil, I've talked to him a few times.. I'll post in his thread and tell him to come post here.
Trending Topics
#8
New Member
iTrader: (41)
Found this while looking for SEMA 2015 Coverage pics, not too sure what to think about that color combo...
Taken by: e46m3lol
http://f30.bimmerpost.com/forums/sho...php?p=18845749
Taken by: e46m3lol
http://f30.bimmerpost.com/forums/sho...php?p=18845749
The following users liked this post:
driftsucky (11-05-2015)
#9
Registered User
Haha thanks Al. Z isn't done 100% by I am very very close to were I want to be. But will of course drop the specs really soon. Already have fitment squared away. More or less it's just misc parts I need to collect before anything.
#17
350Z-holic
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,213
Received 399 Likes
on
227 Posts
Found this while looking for SEMA 2015 Coverage pics, not too sure what to think about that color combo...
Taken by: e46m3lol
http://f30.bimmerpost.com/forums/sho...php?p=18845749
Taken by: e46m3lol
http://f30.bimmerpost.com/forums/sho...php?p=18845749