350z ECU Check Engine Light
 

I have a 2003 350z which was disconnected from its battery for 2 months due to getting body work after a minor accident. The car runs fine and sounds fine, not internal components were affected in the accident only my front bumper and hood. The car has a check engine light and the code comes up with the "ECU" code when i had the code read. (i don't have the actual code because i forgot it; Autozone looked it up in their book and said it was due to my ECU. I have heard of ECU reflashing but didn't want to go through 130$ to find out it has nothing to do with a reflash. I've also tried resetting it via ignition/stepping on a pedal and blah blah. any one have any past experiences to help me?

My friend, no code, no help. Sorry, but we're not telepathic. Take the car to any suto parts store and have it read again, but write it down this time. Better yet, spend $20 and buy yourself a code reader.

https://www.amazon.com/Foseal-Scanne...s=obdii+reader

^ What he said.

If it's a code related to the ecu and it's been unplugged i bet it's P1065. This commonly happens when the z has been unhooked for a while. You can clear the code and it shouldn't come back.

my internet mechanic crystal ball (sponsored by webMD) says your car has gonorrhea

^^^ LAFF!!!:suicide::suicide::suicide:^^^

in all seriousness, like dcains stated without a code we will not know where to start. suck it up, take it to nissan for a proper diagnosis

yeah it was a pl065. i got the car re-read. i ended up dropping it off at Nissan. thank you! hopefully it just needs a code cleared or to be reflashed

UPDATE : i brought the car to Nissan, apparently the code was erased and hasn't returned after I disconnected my battery (the CEL was still on but for a misfire) so i brought it to Nissan for nothing...well a Misfire code ...ugh lol. Code was pl0065 -- ECM Back up.

Yea my car threw codes too after I unplugged it.

Mine was the MAF and some other bits. Appariently it's common for these cars to throw codes when unplugged for a period of time. Like you I was told to just reset the ECU and no codes have been thrown since.

I had 4...

ECU reset
 

is it important to drive car after ecu reset ?????as a video shows on youtube tells that drive car after rest as your car start learning things again

how long u disconnected Ur battery???

Yeah. It usually takes around 25 - 30 miles for the ECU to complete the 'readiness check' after being reset..

Disconnect the negative battery terminal and turn on the headlights for 6 hours.

While singing the hokey pokey......that is the key

...then followed by a circle jerk.