2007 350Z Window Issues - MY350Z.COM - Nissan 350Z and 370Z Forum Discussion



2003-2009 Nissan 350Z

Reply
 
 
 
Thread Tools Search this Thread
Old 02-12-2018, 07:48 AM   #1
chewwyy
Registered User
Thread Starter
 
Join Date: Aug 2016
Location: Niagara Falls, Canada
Posts: 66
Thanked 17 Times in 16 Posts
Default 2007 350Z Window Issues

So, I've been struggling to pin-point my issue with my windows and I'm looking for some help. I have posted updates in my Progress Thread, but figured I'd get more response here. Feel free to take a look at my thread in my signature for more details.

Before everyone says search, I have done the following;
  • Nissan Window Motor TSB
  • Replaced Driver's Window Switch

So after doing the Nissan TSB I spoke with a Nissan tech that I used to work with and he was sure it was the Window Switch. He said it seemed odd for both windows to have a Power Window issue at the same time.

After replacing the Driver's Window Switch, the problem is still there.

So I decided to take a Video;

**FYI: Immediately after the video ended, the locks clicked and locked the doors **


Any and all help/input would be appreciated, thanks!
chewwyy is offline   Reply With Quote
Old 02-12-2018, 08:52 AM   #2
VqJunkie
Registered User
 
Join Date: Jan 2018
Location: Glendale Ca
Posts: 10
Thanks: 0
Thanked 2 Times in 2 Posts
Default

There is a reset procedure you have to do I believe. Hope this helps, good luck. Also don't worry about the 03-05, Nissan made the same crappy motor for all the 350z/g35s
1. Remove the Door Panel. 2003-2005 Front Door Panel Removal Procedure

2. With the door open, lift UP and HOLD the Window Switch until the Window is fully closed.

€ Do not use the Window auto-closing function

€ Do not release the Switch before the Window is fully closed

3. Get inside the vehicle and close the door.

€ You need to close the door so the Door Switch is fully depressed

4. Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened.

Do not use the Window auto-opening function

€ Do not release the Switch before the Window is fully opened


Click image to see it larger

5. Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.

€ Do not use the Window auto-closing function

€ Do not release the Switch before the Window is fully closed

6. Open the Door to release the Door Switch. The Window Glass should partially move down.

7. Re-install the Door Panel.

Last edited by VqJunkie; 02-12-2018 at 08:55 AM.
VqJunkie is offline   Reply With Quote
The Following User Says Thank You to VqJunkie For This Useful Post:
zakmartin (02-12-2018)
Old 02-12-2018, 01:30 PM   #3
SQuaLZ
Sleeps in 350Z
 
SQuaLZ's Avatar
 
Join Date: Jul 2009
Location: New York
Posts: 3,219
Thanked 85 Times in 65 Posts
Default

I spent so much time and effort on this issue. After multiple motors and switches purchased I gave up. If the window goes up and down just leave it. I don't care that my auto-up/down doesn't work. Doesn't bother me anymore.
SQuaLZ is online now   Reply With Quote
Old 02-12-2018, 01:53 PM   #4
chewwyy
Registered User
Thread Starter
 
Join Date: Aug 2016
Location: Niagara Falls, Canada
Posts: 66
Thanked 17 Times in 16 Posts
Default

Quote:
Originally Posted by VqJunkie View Post
There is a reset procedure you have to do I believe. Hope this helps, good luck. .
Thanks, but as mentioned above that was the first thing I did and it did not make a difference.

Quote:
Originally Posted by SQuaLZ View Post
I spent so much time and effort on this issue. After multiple motors and switches purchased I gave up. If the window goes up and down just leave it. I don't care that my auto-up/down doesn't work. Doesn't bother me anymore.
Thanks, but that has nothing to do with my issue. I can't get out of my car and leave it anywhere because my windows roll down on their own when I pull the door release.

BUMP!
chewwyy is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
2007 350z ballast issues.. Anyone familiar ?? 2007base350z Maintenance & Repair 4 08-10-2012 10:03 AM
Anyone with 2007 350z With no Manual tranny issues? itsjiggajames Engine & Drivetrain 29 08-21-2007 03:44 AM
Window issues....passenger window bounce and drivers not working at all!!! Keylan350z Maintenance & Repair 0 08-13-2007 07:53 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -8. The time now is 11:50 AM.


Copyright 2002 - 2017, MY350Z.COM All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: