2006 350z cam sensor
 

I replace the cam sensors but still have the alarm P0345 BANK 2 and I changed the crankshaft sensor still the same problem ,can I get some help , Thanks

Is your car a stick or auto ? The stick car has 2 sensors on each bank

Yes its a stick

Then, since you have a stick, did you replace both cam sensors on each bank?

When I experienced the problem you describe, I had to replace both camshaft sensors and both crankshaft sensors. I started by replacing only one bank (identified by the code), but the fix was replacing all four sensors. My car had close to 90k miles when I did this.

if you have a factory intake , see if the tube that has the PVC hook up on the tube itself, is cracked .

maybe use Nissan sensors?!?

Use the OEM Nissan sensors and save yourself the headache. If one is bad, replace all of them plus the crankshaft. Mine went at about 114k[?]

Thanks everyone and I did replace with nissan part but the other sensors I will replace with nissan parts and let you know if this solved the problem

Did it solve the problem?
I just got a pending code p0345. Hard start on warm engine and power is lagging a little in low rpms.
How many of ya'll that have had this code had to replace all the cam and crank shaft sensors?