problems with VDC and SLIP in my 350z 2003
#1
Registered User
Thread Starter
Join Date: Nov 2018
Location: Chihuahua
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
problems with VDC and SLIP in my 350z 2003
My car when starting it and wanting to start it starts to fail as if it wanted to turn off, pull itself, or as if it were braking, and at the same time turn on and off the VDC and SLIP bulbs on the board, then what I have to do to that does not happen that is to press the VDC button to be deactivated and after that it does not fail me but on the board are left both lights the VDC and SLIP, that is normal in a 350z or someone knows how to solve the problem I have been reading a bit but nothing assures me that it solves the fault I read for example that the ABS system has to be seen by the speed sensors of the wheels, in other places I read for this it can help me to change the position sensors of the Cam trees, and on the other hand I read that it has to do with the angle sensor of the stability control, but in none of the three articles that I read assure me that it is the solution to the problem, can you help me?
thanks!
thanks!
Thread
Thread Starter
Forum
Replies
Last Post
trackpilot
Maintenance & Repair
15
08-17-2019 08:11 PM
Dave 90TT
Brakes & Suspension
6
04-27-2013 12:32 PM