350zchad

iTrader: (1)

looks good!

Please explain the Sub issue and "folded paper"

gdjr27

Switched over from the Veilside wide body to something different. Began project this month!

jhc

Welcome and congratz.

RichV

Older Zees with the Bose stereo that have the subwoofer behind the seat have a problem with the sub amp. A relay tends to come lose from the amp board and the sub stops working.
I found a thread on this forum explaining how to fix that. Basically you just take out the amp, open the amp enclosure and fold up a piece of paper (which I wrapped in electrical tape) and place it over the relay. When you close the amp enclosure it puts pressure on that relay and forces it to make contact again with the amp board.
It worked perfect and makes the Bose stereo sound a lot better!

Heel Til I Die

iTrader: (2)

If you have a soldering iron, you can fix the Bose amp pretty easily for about $5 and replace the relay. I did this a while ago with a relay from RadioShack: 7-9VDC/12A SPDT mini relay.

irishguy0224

iTrader: (3)

Pic from the last cars and coffee on my old set up. Big changes coming for 2016

pondera

I think I'm pretty much done with the exterior of the car at this point.

• Nismo Body Kit (Replica)
• Volk SF Challenge 19" Wheels (19x9.5 +28, 19x10.5 +23)
• Continental ExtremeContact DW Tires (255/35/19, 285/35/19)
• Stubby Antenna
• Tint (Doors Only)

MB33

iTrader: (6)

Clean ride, where did u buy the kit from?

pondera

The front I bought used locally. The sides and rears are from Shine.

irishguy0224

iTrader: (3)

My Z (2) by Kyle, on Flickr
My Z (3) by Kyle, on Flickr

jlb

Damnnnnnn! New rims again?? Very nice.

irishguy0224

iTrader: (3)

Yea, did a bit of a makeover this winter. New wheels, bumper, diffuser, and other misc. ****

RichV

Here are my latest changes...

RichV

Couple more...

Branden Nguyen

What wing is this? It look Slick.

RichV

Thanks bro.

It's a C20 replica made by Shine. In my opinion, it completely changes the look of the roadster. I was never crazy about how the rear looked, but after adding this spoiler, debadging, and tinting the tails, I think it looks much more aggressive and I just love it.

Other things I did, were the Nismo V2 rep front bumper cover, Depo 06+ blacked out headlights, full polish, and spaced my wheels out some. The wheels are now equal 20x9 +20 in front and 20x10 +20 in rear. I want to try to add 5 more mm of spacer but not sure if I can put 10mm spacers on with the stock lugs and make sure there is enough threads on the lugs. I think so. If anyone knows if that is safe, I would live to know.

Car also has a full Nismo exhaust, K&N CAI, dropped about an inch, did the rear spring boot mod to drop the back a little more, drilled
/slotted stock size rotors and I am putting in a Pioneer AVH-3800B DVD head unit next week.

It's a weekend cruiser, not a track car, so it is perfect for me!

Next up is pulling the 5th bow top motor and rebuild. It's starting to act up on me...

irishguy0224

iTrader: (3)

Quickies

quickie by Kyle, on Flickr
look into my eyes by Kyle, on Flickr

irishguy0224

iTrader: (3)

kylem4 by Mark Vasquez, on Flickr
kylem3 by Mark Vasquez, on Flickr
kyle m1 by Mark Vasquez, on Flickr

kiwi4784

iTrader: (1)

Here's the most recent pics of my zr

Heel Til I Die

iTrader: (2)

Old thread bump!