Rear of top does not seal to deck lid
#1
Registered User
Thread Starter
Join Date: Feb 2015
Location: Mississippi
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rear of top does not seal to deck lid
Hello all, this past weekend I installed a Robbins top on my daughters 350. Everything seems to be working ok except when closing the top, the rear window area of the top does not seal against the deck. I can see that the rubber seal has about a 1/8 inch gap where its not sitting down all the way. I also have to pull down on the front of the top to latch it. I have been letting it sit in the sun but it doesn’t seem to help much. Any help would be greatly appreciated as I need to get the car back to her soon, she is in college.
#2
New Member
Hello all, this past weekend I installed a Robbins top on my daughters 350. Everything seems to be working ok except when closing the top, the rear window area of the top does not seal against the deck. I can see that the rubber seal has about a 1/8 inch gap where its not sitting down all the way. I also have to pull down on the front of the top to latch it. I have been letting it sit in the sun but it doesn’t seem to help much. Any help would be greatly appreciated as I need to get the car back to her soon, she is in college.
#3
New Member
Bumping this thread, still after 4 months there is a tiny gap where light shines through when I look back at the rear of the car while sitting in it. About to take it to Nissan to get examined any last thoughts? Had a snow storm stretch it (and sit on top of the cover with weight) STILL no luck.
#4
New Member
I had the same problem when I changed my top. I ended up adding a self adhesive weatherstrip to the bottom of the roof top. It's been there for the last 3 years, never had a problem or leak since then
#5
New Member
thanks again!
The following users liked this post:
MATT12EAGLES (01-25-2021)
Thread
Thread Starter
Forum
Replies
Last Post
ItzYaBoyBugZ
Exterior & Interior
1
02-24-2020 05:50 AM