HokieZ

iTrader: (1)

How about an amp install howto (or link to one previously done). I desperately want to change the stock head unit and factory speakers but know it will require the installation of an amp which I've never done.

Thanks,

FairladyZ

How to remove the front bumper?

alphared

Theres really no set way, you just find a spot and mount it. There are plenty of Amp installs (check the sub thread) Most install are either in the glove box or sub area (same thing just mirror each other.) The only thing really that you need to know is the Amp itself (ie, connections, number of amps, etc..) If you go to JL audio's site, they have info on how to hook up mulitple amps. Also you want to make sure your power and input audio are seperated. If not you'll get noise. IE. if you have power cable going to the glove box on the left and rca cables on the right. Don't mount you amp with the power input on the right and rca input on the left (hence crossing power over rca).

alphared

wrong forum

Its under the Body/Exterior/Interior/Lighting section

https://my350z.com/forum/showthread....bumper+removal

FairladyZ

thanks!!!

corsair

iTrader: (12)

anyone know how to remove the weight in the trunk. i've done countless searches but turned up nothing.

corsair

iTrader: (12)

that is the weight in the hatch which prevents the trunk from fully opening.

srmd22

question: If you wire a detector into the homelink, will it power on and off with the car? And do you need any additional connections to the fusebox?

Rahtok

Stealth V1 install: see link in my sig.

George350Z

This method came to us as we installed the speakers, we had to mutillate the old speakers but so what.
Thanks for the help getting the door panels and rear speaker panel off.

theZman

the "how to take apart the dash" link is not working. scafremon, did you move your website?

George350Z

Hey Zman,
This is where I found it, and I just checked and it was still there
enjoy!

George350Z

George350Z

Sorry, Here is the link,
http://liljerk.morpheus.net/350Z/

George350Z

TIGHT-Z

iTrader: (3)

?

jaw4n

Found this in an old thread for reference.

http://www.paragonwest.com:8080/350zmods/typerinstall/

Maxpowers004

what do you have to do to the factory nav to get it to program while driving

pearl430

what about HOw to take the tweeter off???

anyone knows???

Infern0

iTrader: (1)

How to change out door speakers? And what size will fit?

FLdrifter

I have the stock nav unit and I am not sure how to remove the dash. ( ie real question is what about the screws that are under the rubber mat in the pocket with no nav)?
Thanks

sparky3Z

I was helped greatly by a previous and well done post by Scafremon detailing the steps to remove the central dash and console. It was originally posted on another Z site but it appears it is no longer available at its original link. As luck would have it, I had saved the steps as an Adobe Acrobat file. Note that this was for the 2003 Z dash.

Assuming Scafremon will not object, I have placed a copy of the Acrobat file here for downloading:

http://lr-design.com/photos/%202003Z_Dash_Removal.pdf

The use of a magnetized screwdriver will help.