Start-up screen for Kenwood DNX5120
 

I thought I would share what I found out.

I have been discussing with Kenwood suport these past few days on how to customize the start-up screen.

Here's what you should do:
1. Connect USB that contains your custom background ( for my test, I use a background with 480 x 234 pixels)
2. enter setup mode by:
- holding both SRC+EJECT and while holding it press the RESET button
- wait for the screen that displays:
- Kenwood Image
- OEM image
3. Select OEM Image
4. Select the file that you wanted to be the start-up screen, hit ENTER
5. You will be back to the screen described in (2)
6. Turn OFF unit by holding SRC
7. Turn ON unit by pressing SRC

The unit should start up with your customized background.

is there n e thing like this for the eclipse headunits???

Is this the same with the DNX7120?

my guess is there should be..i have not seen any information about it, though.

I'm not sure how to go about the DNX7120 since you have a full touch screen. The DNX5120 has buttons outside the screen to facilitate performing the procedure.
Email kenwood@alorica.com or call 1-800-536-9663 ext 1918 for details. They are very helpful.

And poost info here lol

E-Mail sent.

Nevermind... I figured out that you have to do all that before you turn the unit ON. I'm a moron... I reset my settings like 10 times...

Any update on this?

Thank you for contacting Kenwood USA Corporation. As an authorized agent for Kenwood, we are responding to your recent email inquiry.

Here are the instructions for changing the startup image on your headunit.

· First connect the USB Thumbdrive containing image file.
· To enter setup Mode, press SRC+EJECT, then RESET.
· Press and hold FNC & EJECT keys, then press RESET Key.
· Release reset key, and hold FNC & EJECT Key until illumination activates.
· If you want to change the opening image to your own image (i.e., company logo), Press OEM Image.
· If you want to put original KENWOOD opening back,press KENWOOD image.
· Select the image you want to use.
· When the image is loaded, select Enter

Your new opening will remain for few
seconds and then switch to the Source
Select menu.



Please feel free to contact us again with any additional questions.

Nice, thanks. And thats for the 7120?