ATL350Z

iTrader: (2)

I have been replacing the crappy Bose system in my car and I finally got it finished. I have a little tuning left to do, but the initial sound is well beyond my expectations. The single 12" driver hits a lot harder than I thought it would.

Here is what I put in the car:
Sony MEX-5DI head unit
Metra dash kit
Polk 6.5" components in the front, 6.5" coaxials in the rear
JL Audio 300/4
JL Audio 250/1
JL Audio 12W3V2 in a fiberglass enclosure

What I was going for was as stealth a look as possible, so I did like several and hid the amps in the original sub enclosure and had a box built for the spare tire well. I have been toying with the idea of getting a blank panel and putting a plexiglass window in so that the amps are visible.

Please excuse the low quality of the pictures. Its was terribly overcast.

Link to pictures

Throbber

man, thats nice! great job on keeping it stock looking. Except for that bada$$ head unit, lets just say it *might* give it away.

Anyways, I hope you enjoy it, and I hope it sounds as good as it "dosent" look.

Papito-Z

To be a high-end speaker manufacture, the speakers in the Touring model are really cheap. Made out paper, and have anyone looked at the sub-woofer? It looks like a flat pancake, with a tiny magnet that can't produce lows/bass. In other word, we need to get credit back from nissan for the bose system. So we can buy a true auto system that belong in a Z. I am Planning in replacing the sub-woofer.

Eric1h

will a regular sized 10" sub fit in that sub enclosure? I was thinking about at least replacing the speakers in the Z

Papito-Z

Where can I find the Metra dash Kit? I have a Alpine 7894 I want to install.

aggie300zx

Nice install!

As for the Metra Kit, the easiest method I found was to call your local Circuit City, talk to one of the guys in the install shop and ask them to order one for you. They should get it in a day or two and it will run you about $18-20. Also, you can buy from them the two wiring harnesses (one for Nissan, other for Alpine), which will allow the install to not require any wire splicing...just snap and go.

roberto350z

yeah me too!!! I love the 7894

ATL350Z

iTrader: (2)

I got mine at CC as well. In particular, I ordered it from the CC on Venture Drive in Duluth. I think the part number was 99-7402, but I'll have to doublecheck that.

Papito-Z

Great, I did order it from CC on Cobb Pky but the guy there did not know where to get the wiring hardness. Did you get that also? Let us know the part number for the wiring hardness if you can,. Thanks.

BDeppe1316

I Like the system man very nice u should of had them build you a speical piece for that head unit so it was flush with the rest of the interior!

Danimsta

iTrader: (3)

man isnt that head unit like 1000 bucks?!?

nice setup!

ATL350Z

iTrader: (2)

I didn't use the wiring harness because I replaced or bypassed almost all of the factory wiring. I only used the +12V, switched 12V, and dimmer signals from the factory harness, so I patched into the harness feed.



Danimsta,

Yes, Crutchfield sells this HU for $1k retail. I got mine shipped new for $650, and it only took 2 days to deliver. I bought it on Ebay from a user named ezorderusa. He has a store on Ebay where he sells a lot of good stereo stuff. Check out his feedback for recommendations. It's a shame that JL doesn't sell online, because I was stuck with limited discounts from Hifi Buys on the amps.