MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

Well, I have finally completed my install (well almost). I still have a few things to take care of like an amp rack cover, and I need to get some plexis glass, but those are minor.

Before I get to the pics I want to say thank you to everyone who answered questions, posted questions, posted answers to those questions, posted pictures, and most importantly posted HOW TO's. A very very BIG THANK YOU goes to tonkadog. Dude, I would not have been able to rewire my doors, run my rca's, or for that matter get my dash off if not for you, thanks so very much :D

Ok, the pics I have flat out suck. I am trying to get my buddy to bring his camera to work so I can get better pics, but until I get them, these will have to do.

As for the system, it is the following:

Head Unit = Eclipse cd5442
Screen = Farenheit T-7001MHR (installed)
DVD Player= Pyle PLDVD96 (NOT INSTALLED YET)
Cross Over = Audiobahn AX303X (with sub remote)
Sub Amp = AutoTek XS 900.2
2 Subs = Kicker SoloBaric 10" L5's (S10L5 to be exact)
Door Speakers = MB Quart RSC 216
Rear Speakers = Kicker k65 Coax
Mids/Highs Amp = AudioBahn A4601T
Capacitor = StingPro 1.5 Farad 20/24 volts w/digital display
Distribution Blocks = 3 in 4 out for Postive (fused)
1 in 4 out for ground
Battery Fuse = 4 in from post (80amps)
wire size = battery to blocks 4 awg
blocks to amps/xover/cap 8awg
remote wire 10awg
box = 3/4 in MDF with Fiberglass/bondo face
Others = Lots of Dynamat, Lots of work, and lots of cuts on my hands, BUT ALL WELL WORTH IT!!!!!:D

I don't know how to post multiple pic's so I will have to post them one by one.
Here goes, I will try and go in order: