2x 15" dc subs tunz of pics
 

so here we go ..

2x 15" dc audio level 4 with xl soft parts behind the seats

3x sets alpine type r srp-60c 6.5 components in the doors

1 mechman 270 amp alt.

2x xs d3400 1 in front one in trunk

4 runs 0 gauge

and various other stuff :gotowned:

trunk for amps

the old setup

2x 12" L7

door plans
looks like i can fit 4x 6.5" in each door

this is gonna get loud and low

made in wood now..
time to start glassing

do u think i should seal the pods ? or keep the back open for more air ?

Seal that ****! JK check the specs on those type R's. Some drivers like infinite baffle, some like sealed.

Why not like, 2 8s in the door or something? seems like it would be more effective. Also, im super sad you decided to chop up the 2006+ doors. I would have bought them from you and sent you my 2004 ones to use instead. Then again im sure theyll still look nicer than the old style.

i wish i could do 8"s but that was the max i could fit =(
i could have fit 1x8 and 1x6.5 but i want it to look symmetrical

i haven't found any recommendations on the alpine speakers as for box specs


im having fun cuttin the car to pieces :icon38:

time for a food break

:icon35:

things seem to be going well for my first attempt at door pods

that's it for today..
all sanding tomorrow
followed by more sanding .
and more sanding :datass:

Subd. How many layers of glass is that and how are you going to attach them? Looks good:thumbup:

im only at 3 layers so far ..
ill be adding more layers and glassing in some wood inserts .. then it will be bolted to the door..

well there was allot of sanding and reshaping
this is defiantly the worst stage..

extra layer on the sides

so that's 1 old tshirt wrap.
and 1 fleece

body fill sanded
wrapped

all done.. just need to mount

next 2x dc audio 15" level 4 right behind the seats =)

door install

door crap
and looks like i have enough for 5 runs of O gauge wire
just gonna do 4 though

had to fix my bumper..
cut 2 inches off it ..
now i can slam it right to the ground without hitting to much
that vertex rear hung lower than any other part of the car ..

all done rear ..
glassed bottom and top mounts
after 2 years starting to crack..
comes very thin from factory