Track pads database?
#161
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
I'll be running carbotech's XP10 Front XP8 Rear this Thursday on my 05 standard brakes, I'll let you know how it goes (although forecast is rain so don't know how much I'll be heating them up)
#163
Club Moderator
the Hot Spot
the Hot Spot
iTrader: (1)
Join Date: Aug 2008
Location: Santa Fe, TX
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
I changed out my fronts almost a year ago with EBC "Red stuff" brake pads & love them. They've held up well through a track day & multiple country road trips. They're made out of a compound that is kevlar/ceramic based. I highly recommend googling them. They have very low brake dust.
#165
Registered User
iTrader: (4)
Join Date: Jul 2008
Location: cincinnati
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=terrasmak;8372436]Your going to need 2 new stub axles, your base ones are the tapered ones like mine were. In the next couple days i'll post more info , mine are in process of being machined to fit. QUOTE]
I was told for the base the OS giken is a bolt in on the 2006 from Z1. You're saying otherwise?
AznSky- where did you pick up your carbotechs from?
I was told for the base the OS giken is a bolt in on the 2006 from Z1. You're saying otherwise?
AznSky- where did you pick up your carbotechs from?
#166
New Member
iTrader: (18)
I used EBC Yellows (I think these were supposed to be better than Red) - They barely lasted one track day - and it was a small 1.5 mile - top speeds about 100. Using oem non-brembo 06 calipers.
I'd vote for the Carbotech's too. I used Xp8's front/rear for two track days and had some meat left.
Oakos has them, or can get them. oakos.com - they are a vendor here.
btw - I have some 06 calipers that haven't hit the marketplace yet...
I'd vote for the Carbotech's too. I used Xp8's front/rear for two track days and had some meat left.
Oakos has them, or can get them. oakos.com - they are a vendor here.
btw - I have some 06 calipers that haven't hit the marketplace yet...
Last edited by thekinn; 05-11-2010 at 06:14 AM.
#167
For track only pads I can personally recommend the Carbotechs as well.
XP12's up front and XP10's in the rear. You can Call Carbotech directly and they will ship the brakes to your house.
XP12's up front and XP10's in the rear. You can Call Carbotech directly and they will ship the brakes to your house.
#168
New Member
iTrader: (10)
Join Date: May 2005
Location: Jersey, New
Posts: 7,146
Likes: 0
Received 0 Likes
on
0 Posts
I have wilwood BP20 material in the front and XP10 material in the back and I can't complain.l I may go with a more aggressive front material since I was getting some vibrations at the end of the session.
#169
I use Ferodo DS3000, was using the 2500's which were good but the 3000's are better.
http://www.raceshopper.com/ferodo_brake_pads.shtml
not a bad bite from cold but once there is some heat in them they start reacting very well, when the car was fast road use i tried EBC products, didnt think they were too bad but not on the same level.
http://www.raceshopper.com/ferodo_brake_pads.shtml
not a bad bite from cold but once there is some heat in them they start reacting very well, when the car was fast road use i tried EBC products, didnt think they were too bad but not on the same level.
#172
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
yeah you can order directly from carbotech ctbrakes.com
HOWEVER! As a warning, carbotech screwed up my and my friends order. Sent us both the wrong pads (we ordered separately). Luckly I was able to get a set of correct carbotech parts or else I would have been pissed. Plus they're giving me a full refund so they're customer service is good, but just make sure they send you the right parts lol.
Plus you can get NASA or SCCA discount through them. But they still are pricey pads. I only plan to run these through and prolly get a bbk next since the pads themselves are expensive.
As for other vendors, Oakos or Forged both sell carbotech's. A friend with a 370 actually said Forged was cheaper than directly from ct.
HOWEVER! As a warning, carbotech screwed up my and my friends order. Sent us both the wrong pads (we ordered separately). Luckly I was able to get a set of correct carbotech parts or else I would have been pissed. Plus they're giving me a full refund so they're customer service is good, but just make sure they send you the right parts lol.
Plus you can get NASA or SCCA discount through them. But they still are pricey pads. I only plan to run these through and prolly get a bbk next since the pads themselves are expensive.
As for other vendors, Oakos or Forged both sell carbotech's. A friend with a 370 actually said Forged was cheaper than directly from ct.
#175
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#177
350Z-holic
iTrader: (46)
I have Porterfield cut some Raybestos ST41 and ST43 calipers special for my non-Brembo (rears). They actually last a few events: sales@porterfield-brakes.com
I am in the midst of upgrading to Brembo rears, so have a bunch of non-Brembo rear pads (street and track) if you'd like to try some for cheap. You also need to consider the rear rotors a consumable, and just bite the bullet. At least they're cheap.
I am in the midst of upgrading to Brembo rears, so have a bunch of non-Brembo rear pads (street and track) if you'd like to try some for cheap. You also need to consider the rear rotors a consumable, and just bite the bullet. At least they're cheap.