Sub belt mounting
 

Anyone have good pics of proper sub belt mounting. Upper and lower. Finally have some down time and getting mine done, inner lap belt is easy , outer seems easy , shoulders just go to my rollbar but the sub belt seems a PITA. I made a small pilot hole straight down from the slot in my seat , and there is a rib in the unibody that will keep me from installing thev4 inch plate . Should I just slot the rib into the empty cavity and have the plate partially in there, the open it up down below to get a welding tip in there. Post post you solutions.

i feel this post was made on mobile.. and possibly after a few drinks. :) do i oddly know you this well? :) haha.

wow, hmm better to go with a 370z site sense they do more installs like that. but good info to be learned hear :)

Typing on new iPad , basically a new system to me. Can I run 2x2 angle iron ? The hole would be slightly off center in the plate but....

Anyone , anyone? This is the sub belt for a 5 point, and with the way the floor of the Z is built i wouldnt event want to try install a 6 point.

Hit up Jorge.. quiksilverz... he has them in his car..I think intense installed them tho and it's in the shop there now....so a pm to intensesales may b faster..

Oh great don't tell me that. I am going to have to put in a 6pt passenger in the next couple weeks. My driver side 6pt was done with custom weld in seat mounts so I did not have to attempt it.