How did you install your spoiler??
 

What's up guys, got a new iNGS style trunk spoiler for my Z and I was curious on what ways you guys have installed these!

i already have 4 holes from my previous big track wing so I was planning on using those existing holes to get the wing on plus some double sided tape all around to "seal" it

pics attached of what style spoiler I'm talking about.

https://cimg4.ibsrv.net/gimg/my350z....97dcf5126b.jpg
https://cimg5.ibsrv.net/gimg/my350z....ea69e8cc17.jpg
https://cimg8.ibsrv.net/gimg/my350z....7845cbb2e9.jpg

ings can be installed w 3m tape and very good prep , including some adhesion promoter

Yah I was thinking of that, but I'd like to put a bolt or two for good measure.

fully unnecessary tbh. just being honest, or id have not said anything :thumbup:, I believe silence is golden. :)

I'll take your word for it! Thanks brotha

Got it on!

https://cimg3.ibsrv.net/gimg/my350z....abd55d1b42.jpg
https://cimg4.ibsrv.net/gimg/my350z....203040a9c2.jpg

This is the stuff you want to use:

http://3mauto.com/3m-super-strong-au...ape-03609.html

Apply around the edges, like I did on this one:

https://photos.smugmug.com/photos/i-...-ZwbJwZn-L.jpg

It's just 3M tape, if you plan to go REALLY fast I might suggest using a threaded pop rivet nut and you can create a template using card stock to make your drills in the trunk.

i got it installed, I used the 3m tape just like that, I also put it 2 bolts per side (my hatch already had holes from previous wing)

Nice! :fyeah: