installing tsurikawa (oh **** handle) on the passenger side
#1
New Member
Thread Starter
installing tsurikawa (oh **** handle) on the passenger side
i just bought a legit jdm tsurikawa and was planning on installing it on the passenger side interior roof panel because there is none on the Z other than the one on the door panel, how do i go about installing this up above on the roof?
#2
wow I have not seen many of those. Good many with a good eye for the classics.
Im guessing you are going for something like
or
if the first one
1 - Unhook the flap and you can easily insert it in between, Wont be as stable and more of a decoration.
2. - you can take out the headliner, over the headliners are styrofoam guards that maintain the headliners, take one out and find a bolt system for you to hook them in (I think there was a slob you can insert the actual tsuri in) then cut a hole on the headliner for the tsuri to go through.
Im guessing you are going for something like
or
if the first one
1 - Unhook the flap and you can easily insert it in between, Wont be as stable and more of a decoration.
2. - you can take out the headliner, over the headliners are styrofoam guards that maintain the headliners, take one out and find a bolt system for you to hook them in (I think there was a slob you can insert the actual tsuri in) then cut a hole on the headliner for the tsuri to go through.
The following users liked this post:
josephcuad (11-04-2017)
#3
New Member
Thread Starter
wow I have not seen many of those. Good many with a good eye for the classics.
Im guessing you are going for something like
or
if the first one
1 - Unhook the flap and you can easily insert it in between, Wont be as stable and more of a decoration.
2. - you can take out the headliner, over the headliners are styrofoam guards that maintain the headliners, take one out and find a bolt system for you to hook them in (I think there was a slob you can insert the actual tsuri in) then cut a hole on the headliner for the tsuri to go through.
Im guessing you are going for something like
or
if the first one
1 - Unhook the flap and you can easily insert it in between, Wont be as stable and more of a decoration.
2. - you can take out the headliner, over the headliners are styrofoam guards that maintain the headliners, take one out and find a bolt system for you to hook them in (I think there was a slob you can insert the actual tsuri in) then cut a hole on the headliner for the tsuri to go through.
The following 7 users liked this post by travlee:
bealljk (11-07-2017),
BluestreamDE (11-06-2017),
iideadeyeii (11-06-2017),
KingBaby (11-06-2017),
Legacy406 (11-04-2017),
and 2 others liked this post.
#7
New Member
Thread Starter
no im good, i dont have time to be wasting thousands of hours of my life in a forum website posting 33 thousand times for fun ¯\_(ツ)_/¯
Trending Topics
#9
350Z-holic
iTrader: (13)
The following 3 users liked this post by bealljk:
#10
New Member
iTrader: (6)
The following users liked this post:
Atreyu'z 350 (11-05-2017)
#12
******
iTrader: (1)
Thats pretty lame.
The following 2 users liked this post by Legacy406:
BluestreamDE (11-06-2017),
jv350z (11-04-2017)
The following users liked this post:
PD27 (06-13-2018)
#15
******
iTrader: (1)
"legit jdm" Christmas ornament for muh car.
The following users liked this post:
Atreyu'z 350 (11-06-2017)
#17
New Member
Thread Starter
#20
Registered User
The race card has been activated.
Looks like you can't have a logical conversation, already being a victim when nobody forced you buy this crap, or forced you to post this garbage. I'm sorry the big bad internet is holding you down.
Looks like you can't have a logical conversation, already being a victim when nobody forced you buy this crap, or forced you to post this garbage. I'm sorry the big bad internet is holding you down.
The following users liked this post:
bealljk (11-06-2017)