My Kinetex 350z / G35 Front Upper Camber Arms Install
#21
New Member
iTrader: (2)
ok so now i have a doubt i recently bought a kinetix full rear/front camber kit ( http://www.kinetixracing.com/kinetix...n_package.aspx ) and i took it for install but the guys of the workshop told me that the rear ones, wouldnt fit because the oem ones and spc's are curved, the kinetix ones are straight, why is it like that? They told me that if they install them, they would interfere with the link kit, just wanted to see if something is wrong, or if it's not being properly installed or something, or if there are installation instructions for them. My car is bone stock in terms of suspension, the reason to install this is because i took it to align and it doesnt gets in parameters, so i would need these. thanks in advance
#24
New Member
iTrader: (2)
nevermind, i already installed them and they fit fine, only thing that i dont know if it's normal is that my car is a little more stiffer in the back now, but that's not a problem at all, the REAL problem is that i can't get my car to align properly, im gonna create a post on suspension area to gather info about that...
#28
Registered User
iTrader: (1)
Join Date: Jan 2012
Location: Texas
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
I'm still on factory suspension and when I installed mine, I had to take off the struts. That area was a little tight, I couldn't fit in a rachet and socket in but a regular straight 6 point wrench worked just fine. Getting to the bolt wasn't an issue for me but the bolt itself was too long to pull out, it was hitting the spring.
#32
Registered User
iTrader: (2)
Installing mine today and the ball joint screw is almost impossible tighten. Do I have a bad nut or is it supposed to be that way. I'm afraid of cross-threading it. Please advise....I also had to change the bushing rods for the factory bolts b/c they would not fit...weird
#33
Registered User
Join Date: Sep 2017
Location: portsmouth, Va 23701
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kinetex upper adj control arms..
Couldn't find a phone no. For these folks...seems odd..Anyway I wanted to know if that $259 price tag was for both or just one
Thread
Thread Starter
Forum
Replies
Last Post