DIY: Jack ramps for lowered cars
#1
DIY: Jack ramps for lowered cars
So after looking around at ramps that cost in excess of $150 just to raise your car a meer 3" i figured I'd make my own. So went to work, bought a 4X8 sheet of 3/4" OSB and 1 1/4" Coarse Drywall screws. I cut the OSB at work to these dimensions; 2 4'x1', 2 3'x1', 2 2'x1', 2 1'x1', and 4 2"x1' for stoppers on top. Cost me a total of $18. Then i put 4 screws in each board, after i pre-drilled, and i was done. I know I'm a cheap *** but this will raise the car up 3" and is raked out enough for cars with front lips and splitters for way less then those gay plastic ramps.
Here is a picture:
Here is a picture:
Trending Topics
#11
Registered User
iTrader: (1)
Join Date: May 2006
Location: West Coast/Pacific Rim
Posts: 7,166
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Abishop
^ nope, just leave them nice and cheap. The all natural OSB look! ha ha
#14
Registered User
iTrader: (4)
Good work Andrew! Very neat idea. I will do the same in Spring once the V2 goes on and my Rhinos become useless.
By the way all, HD and Lowes can also cut OSB into any dimensions. So if you don't have a table saw, don't fret.
By the way all, HD and Lowes can also cut OSB into any dimensions. So if you don't have a table saw, don't fret.
Last edited by usmanasif; 01-26-2008 at 05:08 PM.
#18
Registered User
iTrader: (6)
Join Date: Sep 2006
Location: U S A
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
ramps
Originally Posted by Abishop
So after looking around at ramps that cost in excess of $150 just to raise your car a meer 3" i figured I'd make my own. So went to work, bought a 4X8 sheet of 3/4" OSB and 1 1/4" Coarse Drywall screws. I cut the OSB at work to these dimensions; 2 4'x1', 2 3'x1', 2 2'x1', 2 1'x1', and 4 2"x1' for stoppers on top. Cost me a total of $18. Then i put 4 screws in each board, after i pre-drilled, and i was done. I know I'm a cheap *** but this will raise the car up 3" and is raked out enough for cars with front lips and splitters for way less then those gay plastic ramps.
Here is a picture:
Here is a picture: