DIY'ers, What is wrong with this?
 

The Easter Bunny left me some rims, rubber, tokico d, and some springs. I spent the past weekend installing the suspension and made the biggest noob mistake ever.

Im curious to see who can figure this out. What is wrong with this picture? And no, "You don't have coilovers on the car" is not the correct answer.

http://photos-b.ak.fbcdn.net/photos-...57_3025066.jpg

-Ray

is your abs wire on the wrong side of the "non-coilover"

-j

moderators are wise....

That was the consequence of the action. But Why?

do you have the non-coilover on the wrong side....?

also, looks like you posted this in the wrong forum...but uh, ya, em...


-J

Im the DIY moderator...........:werd:

ya I did!!! Man, you are good!

I posted here because I wanted to see how many DIY'ers there were in the Mid-A.

gangsta...

+10000000 on the avenger shorty antenna. I think your sig is what made me get mine

lol.......cool! its weird, but i was happiest buying that thing over all the other crap i have bought for this car...

i think it had to do with the 10 second installation....lol..

-J

hahahahaha.

Those aren't coilovers.

i also think your swaybar link is not mounted right. or i'm not seeing that hole... are there 4 total ?

?
sway bar looks fine to me.. that Notch is inside hole #2 (from the end of the bar going inwards)

Guys, it's already been answered in post #5, confirmed in #7.

BTW - swaybar is fine. It has 4 holes but one is obscured by the locking tab on the end link.

Yes, answered and done.

This guys, is an example of what not to do.........thanks OP for sharing.....its a small but important point to keep in mind when working on your suspension, weather it be a spring/shock swap like this one, or a complete coilover install........

-J