Ichiba A-arm question
 

Hi everyone,

I ran across the thread on G35 forum, people was saying that Ichiba a-arm doesn't give positive camber. It only gives more negative camber. Is this true or not?

Thanks in advance.

http://z1auto.com/prodmore.asp?model...ng&prodid=3993

minimal positive adjustment compared to other arms.

Does this mean if my car is lowered, which gives it negative camber like this /-----\, this a-arm will be able to adjust it and correct it to |------| ?

Their website mentions +/-3 degrees though?

http://www.ichibausa.com/ic35g35caarm.html


Introducing the Ichiba front and rear adjustable camber arms for your 350Z and G35. Ichiba front and rear adjustable camber arms are direct replacements and allow you to adjust camber on the front and the rear of your 350Z or G35. These arms uses a special compound rubber bushing to ensure smooth operation and minimize noise. No more premature tire wear on your expensive set of wheels! And better handling too!

Appox Adjust: +/- 3 Degree (Depend on how low the car lowered)

Note

The camber arm will not adjust camber to 0 degrees due to car lowered and original factory setup data.

Application

G35 2DR 03-07
G35 4DR 03-06
350Z 03-08

thats probably an accurate measurement for the rear kit; what is on our site is correct