G35c: brembos and stock 17's? anyway to make it fit?
 

Can you make the g35(6 speed )/350z track brembos fit under the stock 17's with some modification on a g35 coupe? Spacers perhaps? not sure.

This has been done by many, the 17 inch wheel will bolt right over the Brembos. No adjustments neccesary. I have 13 inch rotors and 4 piston Stoptech brakes, and in the winter, I run my stock 17 inch wheels with no clearance issues whatsoever.

I was told that on my G35 coupe the stock 17's won't fit over the brembos? Maybe the 350z 17's are different?

also the stoptech 13inch kit is made to fit under the stock17's. not sure about the stock brembos?

Hmm..well, I've seen the stock Z 17 inch wheels over the Z's Brembos, but I havent seen the 350Z's 17's on a G35, so perhaps someone else can confirm this.

sorry I don't mean to confuse anyone. I have my stock 17's (not 350z)on my g35c but want to put in Brembos from a 350z track/G35 6MT.

no, they just barely scrape the brembos. with a 3mm spacer you could probably get away with it, but I had problems using my wifes coupe's 17s on my Z with brembos when I had to send my wheels back to iforged for 6 AND A HALF MONTHS FOR REPAIR! Had to buy performance 18s to get by.

2003z, did you try to put them on the front or rear? I was told rear fit fine but front are the problem. Do you think a 5mm spacer kit would do the trick?