FS: RaceTech 4009 1999 Race Seat, Sparco Seat rails/base, Simpson 6pt harness
01-16-2013, 12:32 PM
#1
RaceTech 4009 1999 Race Seat, Sparco Seat rails/base, Simpson 6pt harness
Seat sold. Sidemounts, harnesses, etc., still available.
I have a Sparco seat that I'm not using, as well as some unused Sparco seat rail items for sale.
The seat is the 4009 1999 with an FIA of 8/05. It already has RaceTech sidemounts, and the metal support you see attached to the seat are made to fit the PASSENGER SEAT. This means that the seat will bolt directly into the passenger side (won't be adjustable) in its current condition. This seat may be used in competition, but it will require the seat back support. The seat back support is not required for HPDE, etc. It was about $1200 new plus the side mounts at ~$200, and I'm looking for 1/2 of that or $700.
Sparco sidemounts are also for sale for $125
The Sparco base, if you need it for another seat, I have for $50 SOLD
Simpson 6pt harness is available as well: $150 Add any hardware you need shown in the picture for $2 each.
I have a Sparco seat that I'm not using, as well as some unused Sparco seat rail items for sale.
The seat is the 4009 1999 with an FIA of 8/05. It already has RaceTech sidemounts, and the metal support you see attached to the seat are made to fit the PASSENGER SEAT. This means that the seat will bolt directly into the passenger side (won't be adjustable) in its current condition. This seat may be used in competition, but it will require the seat back support. The seat back support is not required for HPDE, etc. It was about $1200 new plus the side mounts at ~$200, and I'm looking for 1/2 of that or $700.
Sparco sidemounts are also for sale for $125
The Sparco base, if you need it for another seat, I have for $50 SOLD
Simpson 6pt harness is available as well: $150 Add any hardware you need shown in the picture for $2 each.
Last edited by scotts300; 02-25-2013 at 08:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
